<<
B
B-ISDN
B Channel
B Channel Negotiation
B8ZS
Base Classes
AdminMessage
SKC_DummyMessage
SKC_Message
SKC_ToolkitAck
SKC_ToolkitInbound
SKC_ToolkitMessage
Base Station
Basic Call Signaling
Basic Configuration
Basic Configuration
Startup Sequence/Basic Configuration
Address Resolution Protocol (ARP)
API Messages
Configuration
Configuring IP Address and Subnet Mask
Ethernet Link Redundancy
Flexible RTCP and T.38 Port Selection
Gateway IP Address
VDAC-ONE Card over the EXNET Ring
Basic Configuration Steps
Basic Incoming Call Setup
Basic Outgoing Call Setup
Basic Rate Interface
Basics of PPL
Benefits of PPL and the PPL Composer
Software Architecture
Symbols
Terms and Acronyms
Basics of SS7
Associated Mode Signaling
Customizing
ITU Point Codes
Licenses for SS7 Software Modules
SS7 Network Architectures
SS7 Point Codes
BCC Protocol
Bearer Capability
Before SS7 Over the Ring
Diagram
Using single nodes
Benefits of Call Agent
Benefits of PPL and the PPL Composer
Benefits of using SwitchKit to develop an IN/Wireless Application
Application Development
OAM&P
Role of LLC
SwitchKit API
Best Response Transaction Allocation
Billing features
Binary 8 zero substitution
Bit 7 zero suppression
BLA
BLO Received in Response to IAM
Blocking State
Blocking/Unblocking V5.2 Links & User Ports
Blockout Cards and Panels
BOC
Bong tone
Bong Tone
Boot State
BOOTP
BOOTP Server
BOOTP Server Download
bps
BRA
BRecord Format
BRecord Types
BRI
Bring Channels in Service
Bring Spans in Service
Bring the Ring in Service
Bringing Logical Span IDs (0-7) and V5 IDs (0-3) In Service
Broadcasting
BT IUP
BT IUP
SS7 Software Architecture
BT IUP Call Flows
FAM
Successful Incoming Call - Host Control
Successful Incoming Call Flows
BT IUP Configuration Examples
BT IUP CPC (0x0052)
Atomic Functions
Check for Incoming Congestion
Check Incoming Congestion
Get Timer associated value
IUPCPC Get IUP message Parameter byte from the TLV into GPR #19
IUPCPC Send ACI to L3P
IUPCPC Send ACI to SPRC
IUPCPC Send ACM to L3P
IUPCPC Send ACM to SPRC
IUPCPC Send ANS to L3P
IUPCPC Send ANS to SPRC
IUPCPC Send ASUI to L3P
IUPCPC Send ASUI to SPRC
IUPCPC Send BLA to L3P
IUPCPC Send BLA to SPRC
IUPCPC Send BLO to L3P
IUPCPC Send BLO to SPRC
IUPCPC Send CCF to L3P
IUPCPC Send CCF to SPRC
IUPCPC Send CFN to L3P
IUPCPC Send CFN to SPRC
IUPCPC Send CLR to L3P
IUPCPC Send CLR to SPRC
IUPCPC Send CNA to L3P
IUPCPC Send CNA to SPRC
IUPCPC Send CNA w/data to SPRC
IUPCPC Send CNG to L3P
IUPCPC Send CNG to SPRC
IUPCPC Send FAM to L3P
IUPCPC Send FAM to SPRC
IUPCPC Send IAM to SPRC
IUPCPC Send IFAM to L3P
IUPCPC Send IFAM to SPRC
IUPCPC Send L5 PPL Event Indication with Raw Data
IUPCPC Send OVL to L3P
IUPCPC Send OVL to SPRC
IUPCPC Send RAM to L3P
IUPCPC Send RAM to SPRC
IUPCPC Send REL to L3P
IUPCPC Send REL to SPRC
IUPCPC SEND REL w/data to SPRC
IUPCPC Send SAD to L3P
IUPCPC Send SAD to SPRC
IUPCPC Send SAM to L3P
IUPCPC Send SAM to SPRC
IUPCPC Send SASUI to L3P
IUPCPC Send SASUI to SPRC
IUPCPC Send SEM to L3P
IUPCPC Send SEM to SPRC
IUPCPC Send SND to L3P
IUPCPC Send SND to SPRC
IUPCPC Send UBA to L3P
IUPCPC Send UBA to SPRC
IUPCPC Send UBL to L3P
IUPCPC Send UBL to SPRC
IUPCPC Send Unknown MSG to SPRC
IUPCPC Set Local Circuit Maintenance status to user specified state
IUPCPC Test if Circuit is Blocked
IUPCPC Update Remote Circuit Maintenance Block State to users specified state
IUPCPC Validate and Convert SPRC message to TLV format
Send Block Upon Release Event to L3
Send L5 PPL Event Indication without data
Send PPL Event Indication CLR to L5
Send PPL Event Indication RE-ANSWER (RAN) to L5
Send PPL Event Indication RES to L5
Send PPL Event Indication SUS to L5
Send PPL Event Indication SWAP to L5
BT IUP Incoming Calls
BT IUP Signaling Stack Congestion Control
Congestion Levels
Congestion Status
Building a Configuration File
AddLLCNode
All-In-Service and All-Out-of-Service
Configurable Message Timeout
Configuration Notification
Configuration Stages
Data Array
Message Format
Poll Interval
Range Parameter
Syntax
>>