AF Number

AF Number	91
Name	Set Unequipped Bit and clear all other status for CIC
Description	Resets the CIC state database by clearing all status bits and setting the ‘unequipped’ bit.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	92
Name	Send Message to UCIC
Description	Delivers an incoming message to UCIC.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	93
Name	Update HW Blocking Circuit Status
Description	Updates the ‘Hardware Blocking’ status bits (Hardware Local Blocked, Hardware Remote Blocked) in the CIC state database based on receiving an update message from an ISUP state machine.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	94
Name	Update Maintenance SM Circuit Status
Description	Updates the maintenance-related status bits (Maintenance Unblock Wait, Hardware Unblock Wait, CRCR Recheck Active) in the CIC state database based on receiving an update message from an ISUP state machine.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	95
Name	Send MSG to CRCR
Description	Delivers an incoming MSU to CRCR.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	96
Name	Test Circuit Status for CRCR Recheck
Description	Tests if CRCR Recheck is active for a CIC.
Arg1	<Not Used>
Arg2	<Not Used>

Test Result	PPL Internal Event
No (Inactive)	0
Yes (Active)	1

AF Number	97
Name	Test Message Parameter with Bit Mask
Description	Tests a bit field within the parameter indicated by Arg1. The most significant byte of Arg2 is used as a byte offset into the parameter. The least significant byte of Arg2 is used as a bit mask which is masked with the byte in the parameter specified in the MSB of Arg2. The result is then right-shifted until the right-most bit in the mask is in the least significant bit
Arg1	<Not Used>
Arg2	<Not Used>

Test Result	PPL Internal Event
Value	0 + value of bit field

AF Number	98
Name	Send Message to MGBR
Description	Delivers an incoming message to MGBR.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	99
Name	Send Message to MGBS
Description	Delivers an incoming message to MGBS.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	100
Name	Send Message to HGBR
Description	Delivers an incoming message to HGBR.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	101
Name	Send Message to HGBS
Description	Delivers an incoming message to HGBS.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	102
Name	Test Circuit Status for Transient
Description	Tests the ‘transient’ status bit in the CIC state database.
Arg1	<Not Used>
Arg2	<Not Used>

Test Result	PPL Internal Event
Bit not set	0
Bit set	1

AF Number	103
Name	CPC Circuit Status and remove unequipped status
Description	Updates the ‘CPC’ status bits and clears the ‘unequipped’ status bit in the CIC state database.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	104
Name	Clear status bits for unequipped circuits. Test if number of status bits is range
Description	Tests if the range field of the Range and Status parameter of an incoming message is in the range defined by Arg1 and Arg2. The status bits for all unequipped circuits from the status field in the Range and Status parameter are cleared.
Arg1	<Value 1> Beginning of range.
Arg2	<Value 2> End of range.

Test Result	PPL Internal Event
In range	1
Not in range	0

AF Number	105
Name	Send L5 PPL Event Indication for stack
Description	Sends a PPL Event Indication to the host with entity of stack and event given by Arg1.
Arg1	<Event ID>
Arg2	<Not Used>

AF Number	106
Name	Place DPC in UPU queue
Description	Places the DPC given in the MTP indication in the UPU queue.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	107
Name	Check for DPC in UPU Queue and remove
Description	Tests the User Part Unavailable (UPU) queue for the DPC given in the MTP indication and, if there, removes it.
Arg1	<Not Used>
Arg2	<Not Used>

Test Result	PPL Internal Event
DPC in queue	1
No DPC in queue	0

AF Number	108
Name	Send L3P User Part Accessible
Description	Sends L3P an indication that a remote ISUP has become accessible.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	109
Name	Clear Unequipped Bit for CIC
Description	Clears the ‘unequipped’ status bit in the CIC state database.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	110
Name	Update CPC Circuit Status
Description	Updates the ‘CPC’ status bits in the CIC state database.
Arg1	<Event ID>
Arg2	<Not Used>

AF Number	129
Name	Sprc_af_129
Description	Find MCP parameter in the unrecognized message.
Arg1	<Event ID>
Arg2	<Not Used>

Test Result	PPL Internal Event
If parameter found	1
If parameter not found	0

AF Number	130
Name	Sprc_af_130
Description	Send unrecognized message PPL event indication containing unrecognized message to the host, with channel AIB.
Arg1	<Event Indication ID> 0-255
Arg2	<Not Used>

AF Number	131
Name	Sprc_af_130
Description	Send a release with cause value 97 to the network and send and indication to CPC.
Arg1	<Not Used>
Arg2	<Not Used>

AF Number	133
Type	Test
Name	SPRC test if Host controlled continuity enabled
Description	Looks into the common CPC area and checks if the Host Controlled Continuity is enabled.
Arg1	None
Arg2	None
Test AF Results	PPLevIntEVENT_0,PPLevIntEVENT_1