You can activate Diva SNMP support using the WEB-based System configuration or using the console-based Config application.
You can activate the Diva SNMP extension manually with the following command: /usr/lib/opendiva/divas/divasnmpx. If there is a master SNMP agent running, divasnmpx attaches to its AgentX socket /var/agentx/master. On failure, it retries to open the socket every 10 seconds. This also applies during shutdown/restart of the SNMP master agent: Dialogic® Diva® SNMPX automatically reattaches to the master socket as soon as it is available again.
Diva SNMPX automatically detects the start of new Diva Media Boards and the shutdown of existing Diva Media Boards and uses interface state traps to indicate these events to the management application.
Command line options:
-f |
Do not fork into background. Error messages are logged to stdout instead of syslog. Exit with "q" or "CTRL-C". |
-s |
No error logging. Disable logging of error messages to syslog or stdout, depending on operating mode. |
-oN |
Specify offset for ifIndex. The Dialogic® Diva® System Release software entries in MIB-II's interfaces.ifTable are indexed by a number starting from this offset + 1. Default value is "- o100". |
-oN -h |
Command line help. |