TUP management function summary

NMS TUP consists of the following management functions:

Configuration functions
Control functions
Statistics functions
Status functions

Configuration functions

Function	Description
TUPGetCircCfg	Gets circuit configuration from the TX board.
TUPGetGenCfg	Retrieves the basic configuration from the TX board.
TUPGetGrpCfg	Retrieves the current, pre-defined circuit group configuration.
TUPGetNSapCfg	Retrieves the basic network service access point configuration from the TX board.
TUPGetUSapCfg	Retrieves the basic user service access point configuration from the TX board.
TUPInitCircCfg	Initializes a buffer that can be passed to TUPSetCircCfg.
TUPInitGenCfg	Builds a basic configuration buffer that can be passed to TUPSetGenCfg.
TUPInitGrpCfg	Initializes a group configuration structure.
TUPInitNSapCfg	Builds a basic configuration buffer that can be passed to TUPSetNSapCfg.
TUPInitUSapCfg	Builds a basic configuration buffer that can be passed to TUPSetUSapCfg.
TUPSetCircCfg	Sets circuit configurations to the TX board.
TUPSetGenCfg	Sends a basic configuration buffer to the TX board.
TUPSetNSapCfg	Sends a basic network service access point configuration buffer to the TX board.
TUPSetUSapCfg	Sends a basic user service access point configuration buffer to the TX board.

Control functions

Function	Description
TUPAlarmControl	Sends a request to control alarms.
TUPBlockCircuit	Sends a request to block the given circuit.
TUPBlockGroup	Sends a request to block the given group of circuits.
TUPDeleteCircuit	Sends a request to delete the given circuit.
TUPDeleteGroup	Sends a request to delete the given group of circuits.
TUPInitMgmtAPI	Initializes TUP management and opens a channel to the TX board.
TUPQuietReset	Sends a request to the board to reset all circuits without generating TUP traffic.
TUPResetCircuit	Sends a request to reset the given, pre-defined circuit.
TUPResetGroup	Sends a request to reset the given group of circuits.
TUPTermMgmtAPI	Closes TUP management and the channel to the TX board.
TUPTraceControl	Sends a request to enable or disable tracing of TUP protocol messages.
TUPUnblockCircuit	Sends a request to unblock the given circuit.
TUPUnblockGroup	Sends a request to unblock the given group of circuits.

Statistics functions

Function	Description
TUPGetCircStats	Sends a request to retrieve the statistics for a given circuit.
TUPGetGrpStats	Sends a request to retrieve the statistics for a given, pre-defined circuit group.
TUPGetNSapStats	Sends a request to retrieve the statistics for a given network service access point.

Status functions

Function	Description
TUPGetCircStatus	Sends a request to retrieve the status for a given circuit.
TUPGetGrpStatus	Sends a request to retrieve the status for a given, pre-defined circuit group.