The following table alphabetically lists the ADI service events:
|
Event name |
Description |
|---|---|
|
ADIEVN_BOARD_ERROR |
Unexpected board error returned. This error can mean that the TCP initiated call clearing from an inappropriate state. |
|
ADIEVN_BOARD_EVENT |
Low-level board event returned. |
|
ADIEVN_COLLECTION_DONE |
Digit collection complete. |
|
ADIEVN_CP_BUSYTONE |
Call progress analysis detected busy. |
|
ADIEVN_CP_CED |
Call progress analysis detected modem tone. |
|
ADIEVN_CP_DIALTONE |
Call progress analysis detected dial tone. |
|
ADIEVN_CP_DONE |
Call progress analysis complete. |
|
ADIEVN_CP_NOANSWER |
Call progress analysis detected no answer (after ringing). |
|
ADIEVN_CP_RINGTONE |
Call progress analysis detected ring tone (remote alerting). |
|
ADIEVN_CP_RINGQUIT |
Call progress analysis detected ring, but it stopped. |
|
ADIEVN_CP_REORDERTONE |
Call progress analysis detected reorder tone (fast busy). |
|
ADIEVN_CP_SIT |
Call progress analysis detected SIT (special information tone). |
|
ADIEVN_CP_VOICE |
Call progress analysis detected voice. |
|
ADIEVN_DIAL_DONE |
Dial function complete. |
|
ADIEVN_DIGIT_BEGIN |
Raw DTMF digit detected on. |
|
ADIEVN_DIGIT_END |
Raw DTMF digit detected off. |
|
ADIEVN_DTMF_DETECT_DONE |
DTMF detector terminated. |
|
ADIEVN_ECHOCANCEL_STATUS |
Arrival of echo cancellation status information. |
|
ADIEVN_ECHOCANCEL_TONE |
Arrival of echo cancellation tone disabler information. |
|
ADIEVN_ENERGY_DETECT_DONE |
Energy detector terminated. |
|
ADIEVN_ENERGY_DETECTED |
Energy detector reporting energy. |
|
ADIEVN_FSK_RECEIVE_DONE |
FSK receive operation complete. |
|
ADIEVN_FSK_SEND_DONE |
FSK send operation complete. |
|
ADIEVN_MF_DETECT_DONE |
MF detector terminated. |
|
ADIEVN_MF_DIGIT_BEGIN |
MF digit detected on. |
|
ADIEVN_MF_DIGIT_END |
MF digit detected off. |
|
ADIEVN_PLAY_BUFFER_REQ |
Asynchronous request for a buffer to play. |
|
ADIEVN_PLAY_DONE |
Play operation complete. |
|
ADIEVN_PULSE_DONE |
Pulse function complete. |
|
ADIEVN_QUERY_SIGNAL_DONE |
Returned query of out-of-band signaling bits. |
|
ADIEVN_RECORD_BUFFER_FULL |
Asynchronous buffer to write to disk. |
|
ADIEVN_RECORD_DONE |
Record operation complete. |
|
ADIEVN_RECORD_EVENT |
Information sent by the custom recording function. See adiCommandRecord for more detail. |
|
ADIEVN_RECORD_STARTED |
Record operation started. |
|
ADIEVN_SIGNALBIT_CHANGED |
Signal detector reporting a change. |
|
ADIEVN_SIGNAL_DETECT_DONE |
Signal detector terminated. |
|
ADIEVN_SILENCE_DETECTED |
Energy detector reporting silence. |
|
ADIEVN_STARTPROTOCOL_DONE |
Acknowledgment of start protocol. |
|
ADIEVN_STOPPROTOCOL_DONE |
Acknowledgment of stop protocol. |
|
ADIEVN_TIMER_DONE |
Timer function complete (expired). |
|
ADIEVN_TIMER_TICK |
Timer function reporting timer tick. |
|
ADIEVN_TONE_1_BEGIN |
Precise tone 1 detected on. |
|
ADIEVN_TONE_1_DETECT_DONE |
Precise tone detector 1 terminated. |
|
ADIEVN_TONE_1_END |
Precise tone 1 detected off. |
|
ADIEVN_TONE_2_BEGIN |
Precise tone 2 detected on. |
|
ADIEVN_TONE_2_DETECT_DONE |
Precise tone detector 2 terminated. |
|
ADIEVN_TONE_2_END |
Precise tone 2 detected off. |
|
ADIEVN_TONE_3_BEGIN |
Precise tone 3 detected on. |
|
ADIEVN_TONE_3_DETECT_DONE |
Precise tone detector 3 terminated. |
|
ADIEVN_TONE_3_END |
Precise tone 3 detected off. |
|
ADIEVN_TONE_4_BEGIN |
Precise tone 4 detected on. |
|
ADIEVN_TONE_4_DETECT_DONE |
Precise tone detector 4 terminated. |
|
ADIEVN_TONE_4_END |
Precise tone 4 detected off. |
|
ADIEVN_TONE_5_BEGIN |
Precise tone 5 detected on. |
|
ADIEVN_TONE_5_DETECT_DONE |
Precise tone detector 5 terminated. |
|
ADIEVN_TONE_5_END |
Precise tone 5 detected off. |
|
ADIEVN_TONE_6_BEGIN |
Precise tone 6 detected on. |
|
ADIEVN_TONE_6_DETECT_DONE |
Precise tone detector 6 terminated. |
|
ADIEVN_TONE_6_END |
Precise tone 6 detected off. |
|
ADIEVN_TONES_DONE |
Tone generation function complete. |