The following table lists the switching errors (0x0C00):
|
Error name |
Hex |
Description |
Category |
|---|---|---|---|
|
SWITCH_MGR_ERROR_INVALID_PARAM |
0x0C01 |
Invalid switching command. |
1 |
|
SWITCH_MGR_ERROR_OUT_OF_MEMORY |
0x0C02 |
No more memory. |
3 |
|
SW_ERR_OUT_OF_MEMORY |
0x0C20 |
Switching ran out of memory. |
3 |
|
SW_ERR_HARDWARE_NOT_FOUND |
0x0C21 |
Switching hardware not found. |
3 |
|
SW_ERR_TIMESLOT_IN_USE |
0x0C22 |
Internal switching error. |
3 |
|
SW_ERR_UNREACHABLE_TERMINAL |
0x0C23 |
Internal switching error. |
3 |
|
SW_ERR_WIRE_NOT_INTERCHANGER |
0x0C24 |
Internal switching error. |
3 |
|
SW_ERR_INVALID_TERMINALID |
0x0C25 |
Internal switching error. |
3 |
|
SW_ERR_INVALID_OPERATION |
0x0C26 |
Internal switching error. |
3 |
|
SW_ERR_NOT_POSSIBLE |
0x0C27 |
TDM path not found. |
1 |
|
SW_ERR_OUT_OF_BOUNDS |
0x0C28 |
Internal switching error. |
3 |
|
SW_ERR_STORE_EXCEEDED |
0x0C29 |
Internal switching error. |
3 |
|
SW_ERR_WRONG_RECORD_TYPE |
0x0C2A |
Internal switching state error. |
3 |
|
SW_ERR_NO_PATH |
0x0C2B |
TDM path not found. |
1 |
|
SW_ERR_NO_SUCH_HOP |
0x0C2C |
Internal switching state error. |
3 |
|
SW_RECORD_NOT_FOUND |
0x0C2D |
Internal switching state error. |
3 |
|
SW_ERR_INVALID_OBJECT_STATE |
0x0C2E |
Internal switching state error. |
3 |
|
SW_ERR_INVALID_PARAMETER |
0x0C2F |
Internal switching state error. |
3 |
|
SW_ERR_MAPPING_FAILED |
0x0C30 |
Internal switching error. |
3 |
|
SW_ERR_VIRTUAL_NOT_MAPPED |
0x0C31 |
Internal switching error. |
3 |
|
SWITCH_MGR_ERR_NOT_ENABLED |
0x0C32 |
Hardware or EEPROM fault during initialization. |
3 |
|
SW_ERR_TIMESLOTS NOT_AVAILABLE |
0x0C33 |
Internal switching state error. |
3 |
|
SW_ERR_INVALID_STREAM |
0x0C34 |
Stream does not exist. |
1 |
|
SW_ERR_PHYSICAL_TO_LOGICAL_MAP_FAILED |
0x0C35 |
Internal switching error. |
3 |
|
SW_ERR_DEVICE_ERROR |
0x0C36 |
Internal signaling DSP error. |
3 |
|
SW_ERR_NOT_SUPPORTED |
0x0C37 |
Internal switching error. |
3 |
|
SW_ERR_NO_SUCH_TIMESLOT |
0x0C38 |
Internal switching error. |
3 |
|
SWI_FAILED_TO_INITIALIZE |
0x5000 |
Switching system initialization error. |
3 |