The following table describes NCC.X.ADI_EL7 parameters. Generally, these parameters are not altered from their default values.
|
Field |
Unit |
Default |
Description |
|---|---|---|---|
|
WaitForPC |
ms |
10000 |
Time protocol will wait for application before taking independent action. |
|
WaitForSeizureAck |
ms |
5000 |
(0 = forever) waiting for network acknowledgment of the seizure (outbound). |
|
WaitForAnswerAck |
ms |
2000 |
(0 = forever) waiting for network acknowledgment after answering call (inbound). |
|
WaitBeforeOutOfService |
ms |
25000 |
(0 = forever) waiting for network idle before line is taken out of service. |
|
QualifyOn |
ms |
12 |
Qualification of signaling detector changes (DSP). |
|
PulseIn |
ms |
25 |
Qualification of received detector changes (TCP). |
|
PulseOut |
ms |
60 |
Duration of transmitted signaling pulses. |
|
WaitIdleAfterReject |
ms |
120 |
After rejecting inbound call, time before idle. |
|
WaitForReconnectBack |
ms |
2000 |
Wait for recall after clearing second call. |
|
WaitForRecallAck |
ms |
5000 |
Wait for recall register acknowledge. |
|
ReleaseGuard |
ms |
650 |
Minimum idle time after call clearing. |
|
NetworkSide |
mask |
0 |
Must be set to 0. |
|
WaitForAnswerOffHook |
ms |
20000 |
Do not modify. |
|
VariableDigits |
ms |
1 |
Do not modify. |
|
NumberOfDigits |
count |
3 |
Do not modify. |
|
WaitFirstDigit |
ms |
7000 |
Do not modify. |
|
WaitNextDigit |
ms |
3000 |
Do not modify. |