Displays EEPROM contents and dumps the on-board error log.
cg6ktool options
where options are:
|
Options |
Description |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
-A |
Displays the board's bus information, slot information, temperature, and fan tachometer status. |
||||||||||||
|
-B -lbus:slot |
Blinks the board's LED. |
||||||||||||
|
-R -lbus:slot |
Resets a specified board. |
||||||||||||
|
-M -lbus:slot -aaddress -ssize |
Dumps memory in binary format to the file memdump_at_bus_slot.txt. If the starting byte (address) and number of bytes (size) are not specified, the defaults are 0 and 1 MB respectively. To dump the file in ASCII format, add the -t1 option. |
||||||||||||
|
-tfiletype |
Specifies the file type (text = 1, binary = 2). |
||||||||||||
|
-S -lbus:slot |
Dumps error and stack information to the file errdump_at_bus_slot.txt. |
||||||||||||
|
-eboarddeviceID |
Applies the specified command to all CG boards of the specified type in the chassis. Can be used instead of -lbus:slot.
|
||||||||||||
|
-h |
Display help information. |
An option applies to all boards if you do not specify either -l or -e.
cg6ktool supports multiple CG boards. Some of these commands are shown for reference only and may not pertain to the CG 6565E board.