Show switch connections: showcx95

Displays switch connections.

Usage

showcx95 [switch_driver]

Description

Displays the switch connections for all boards that have MVIP switches. If a pattern is being sent on a timeslot, the pattern value is displayed.

Procedure

To run showcx95 for AG boards, enter the following command:

showcx95 agsw

Example

The following example makes connections between an AG 2000 board and an AG 4040 board.

The following ppx.cfg file is used for this example:

[PPX]
Fabric
    Bus H100
        CTBUS:0..15:0..31
        CTBUS:16..23:0..63
        CTBUS:24..31:0..127
    End Bus
    Switch 0                            ## AG 2000 
        SwitchType = HMIC
        DeviceName = "agsw"
        DeviceNumber = 0
        Bus H100 (CTBUS:0..15:0..31)
        Inputs                  
            LOCAL:0..6(2):0..7   
        End Inputs
        Outputs                     
             LOCAL:1..7(2):0..7   
        End Outputs
    End Switch
    Switch 2                             ## AG 4040
        SwitchType = HMIC
        DeviceName = "agsw"
        DeviceNumber = 2
        Bus H100 ()
        Inputs                       
            LOCAL:0..14(2):0..23     # Trunk
            LOCAL:16..18(2):0..127   # DSP
        End Inputs
        Outputs                           
            LOCAL:1..15(2):0..23     # Trunk
            LOCAL:17..19(2):0..127   # DSP
        End Outputs
    End Switch
End Fabric

For the following swish commands:

ppx.Connect  0:local:0:0   to 2:local:17:0   SIMPLEX
ppx.Connect  0:local:0:2   to 2:local:17:2   DUPLEX
ppx.Connect  0:local:0:4   to 2:local:17:4   QUAD

The showcx95 output is:

SHOWCX95 Version 1.1      Jan 15 2004

AGSW 0
 M-14:02                <-  L-00:00
 M-14:04                <-  L-00:02
 M-14:06                <-  L-00:04
 M-14:07                <-  L-02:04
 L-01:00                <-   0x7f
 L-01:02                <-  M-15:00
 L-01:04                <-  M-15:01
 L-01:06                <-   0x7f
 L-03:00                <-   0x00
 L-03:02                <-   0x00
 L-03:04                <-  M-15:02

AGSW 2
 M-15:00                <-  L-16:02
 M-15:01                <-  L-16:04
 M-15:02                <-  L-18:04
 L-01:00..23            <-   0x7f

[...]
 L-15:00..23            <-   0x00
 L-17:00                <-  M-14:02
 L-17:01                <-   0x7f
 L-17:02                <-  M-14:04
 L-17:03                <-   0x7f
 L-17:04                <-  M-14:06
 L-17:05..127           <-   0x7f
 L-19:00..03            <-   0x00
 L-19:04                <-  M-14:07
 L-19:05..127           <-   0x00

In the showcx95 output, M indicates MVIP bus and L indicates local bus. The showcx95 output shows three types of connections:

• Pattern 0x7F is sent to timeslot Local:01:02.

L-01:02 <- 0x7f

• Timeslots Local:00:00..04 are writing to timeslots Local:05:00..03.

L-05:00..03 <- L-00:00..04

• Timeslot MVIP:00:00 is writing to timeslot Local:01:00.
  Timeslot Local:00:00 is writing to timeslot MVIP:01:00 (a duplex connection).

M{00/01}:00 <-> L{01/00}:00