Establishing a 3G-324M over IP Session

After configuring the boards, and creating and connecting all components shown in Network Architecture, the host application must perform the following tasks to establish a 3G-324M session with an NbUP RTP Bearer:

Task Use For more information, see...
  1. Initiate BICC Call Control (either inbound or outbound).
 SS7 ISUP Dialogic® NaturalAccess™ ISUP Layer Developer's Reference Manual
  1. Proceed with Bearer IP Control, and get the remote IPBCP parameters.
 SS7 ISUP and BCF API Dialogic® NaturalAccess™ ISUP Layer Developer's Reference Manual and Bearer Control Function Library Overview.
  1. Configure the H223 GW RTP NbUP Endpoint and Channel according to remote IPBCP parameters. (IP address, UDP port, Payload ID, packetization time)
 NaturalAccess MSPP Dialogic® NaturalAccess™ Media Stream Protocol Processing API Developer's Manual
  1. Establish the NbUP session.
 NaturalAccess Fusion NbUP Endpoint Dialogic® NaturalAccess™ Fusion NbUP Endpoint and Clear Channel Reference Manual
  1. Set up a 3G-324M session.
 3G-324M Interface Dialogic® NaturalAccess™ Video Access Toolkit 3G-324M Interface Developer's Reference Manual