Follow the steps below to install the PowerMedia WMS Release 1.0 CD, which can be created from an ISO image available for download on the Dialogic Web site at http://www.dialogic.com/products/ip_enabled/wms/wms.htm?dl=1®ID=38097
Boot the Linux system and login as the root user.
Insert the PowerMedia WMS Release 1.0 CD into the CD/DVD drive.
Copy installWMS.sh onto the system in the /root directory. Run the following commands:
cd /root/
dos2unix installWMS.sh
chmod 777 installWMS.sh
The dos2unix command is a precaution in case the script has been manipulated on a Windows® machine prior to copying onto the Linux system.
Ensure that the CD is in the drive. Run ./installWMS.sh
Caution: If the CD is NOT in the drive, you will have to uninstall the PowerMedia WMS software and re-install from the beginning.
After the installation is complete, compare /tmp/wms_pkg_install.log with the information below to ensure that all the installation steps completed properly.
Installing Dialogic PowerMedia WMS software...
Preparing...
################################################
version == 1.0.0
Stopping nscd: [FAILED]
The snow group already exists (that's okay)
The snow_operator group already exists (that's okay)
Removing password for user admin.
passwd: Success
Starting nscd: [ OK ]
Creating 15 minute log rotation directory
Creating 30 minute log rotation directory
Adding 15 minute job to crontab
Adding 30 minute job to crontab
SNOWG2SYS
#################################################
Modifying /etc/security/ ...
Modification complete
Modifying /etc/pam.d/ ...
Modification complete
Modifying /etc/inittab ...
Modification complete
Disabling unneeded services...
Enabling needed services...
Modification complete
Modifying squid configuration file...
Enabling SNMP...
SNOWG2MPS
#################################################
SNOWG2MS
#################################################
Enabling needed services...
Modifying /etc/inittab ...
Modification complete
Modification complete
Using Dialogic SNMP config file
net-snmp version 5.3.1
Installing Licensing...
Licensing Installation complete
No additional SuSE libraries needed
Installing additional net-snmp libraries
Removing Accounting
Accounting Removed
Didn't find dialogic and cantata on search line, updating resolv.conf
SNOWG2MSGUI
##################################################
Adding Dialogic syslog config
Increasing Apache MaxClients to 310
Setting php.ini's post_max_size to 200M
Setting php.ini's memory_limit to 200M
Setting php.ini's upload_max_filesize to 200M
Preparing...
##################################################
DIALOGICWMS
##################################################
create soft link
Adding lighttpd Startup
DIALOGICWMSDEMO
##################################################
Completed RHEL5_U2 Installation -
Thu Apr 22 14:15:22 EST 2010
Verify that the /tmp/postinstall.log file is empty, which indicates that there were no errors in the installation.
Enter eject at the prompt and remove the PowerMedia WMS Release 1.0 CD.
Enter reboot to finalize the installation.
After the reboot, log in as the root user, and check the following log file to ensure that there are no errors in the following files:
/var/snowshore/log/restfulwslog.txt
/var/snowshore/log/lighttpderror.log
/var/snowshore/log/loghttpdaccess.log
Run the following command to verify that the PowerMedia WMS packages are installed indicating that the installation completed properly.
localhost.localdomain > rpm -qa | grep DIALOGIC
DIALOGICWMS-1.0.0-4.EL5.0
DIALOGICWMSDEMO-1.0.0-4EL5.0