This section provides the steps required to successfully install PowerMedia XMS. There are two installation methods available:
RPM Method (used for a CentOS or RHEL installation)
Regardless of the installation method used, the recommended minimum and recommended system requirements are as follows:
Item |
Requirement |
Hardware |
Intel Architecture-based server |
Operating System |
Note: 32-bit operating systems are not supported. Community ENTerprise Operating System (CentOS) 6.2 or higher (provided with the installation) Red Hat Enterprise Linux (RHEL) 6.2 or higher Note: The perl-core-5.10.1-xxxxx.x86_64.rpm is required if using the RPM Method. |
Processor |
Minimum: Intel Xeon E5420 Quad-Core (2.50 GHz, 1333 MHz FSB, 80W) Recommended: Intel Xeon X5650 Dual Hex-Core (2.66 GHz, 1333 MHz FSB) or better for performance systems |
Ethernet |
Dual 1000Base-TX (RJ-45) |
Memory |
Minimum: 4 GB RAM Recommended: 8 GB RAM or higher |
Storage |
60 GB HDD |
Note: The recommended server configuration is applicable for higher density audio solutions of 1500 or greater sessions, video transcoding solutions, or solutions utilizing virtualization. |
|