Features of Dialogic® Diva® BRI and PRI Media Boards via Interface

The following features are available with the Diva ISDN Media Boards:

Feature

IDI

TTY

CAPI 2.0 /
Dialogic® Diva® API

Transparent HDLC, 64/56[d] kbps

Transparent (Voice) (8 bit 8 kHz A- Law/u-Law)

X.75 64/56[d] kbps

X.75/V.42bis

T.70/T.90 (T-Online) [g]

V.110 (GSM) [a] [g]

V.120 64/56 kbps (CompuServe)

V.120/V.42bis

Digital (Central Office) V.90 modem [a]

V.34+, V.90 analog modem [a] [d] [g]

SMS modem ETSI V1,V2 and auto-detection [a]

Dialogic® Diva® Fast Setup [a]

SDLC

V.42, V.42bis [a] [d] [g]

Change of B-channel protocol

 

LAPD/B

 

X.25 [e], X.31, ISO 8208 in the B-channel

 

PIAFS 1.0, 2.0, and 2.1 [b]

Automatic call type and PPP frame type detection

 

 

Async/sync conversion

 

 

Fax Group 4 [c] [g]

 

T.30 Fax Group 3 (analog) [a] [g]

FAX CLASS 1, 2 [a] [g]

 

 

Fax with Error Correction Mode (ECM) [a] [g]

Fax with MR (D2 coding) [a] [g]

Fax with MMR (T.6 coding) [a] [g]

Fax 33.6 kbps with MMR (T.6 coding) [a] [g]

Fax 14.4 kbps [a] [g] [h]

Fax 33.6 kbps (V.34) [a] [g] [h]

Fax T.38 (up to 33.6 kbps) [h]

Fax tone detection [a]

Reversal of fax direction [a] [g]

 

Fax polling / fax on demand [a] [g]

Fax speed and feature indication (polling and ECM) [a] [g]

Fax SEP/SUB/PWD [a]

Fax NSF [a]

 

New fax header line [a] [g]

 

Page formats: ISO A4, ISO B4, ISO A3 [a] [g]

 

Resolution: standard, fine, super-fine, ultra-fine [a] [g]

 

DTMF tone detection and transmission [f]

 

DTMF clamping [a]

 

Cross-board switching (via line interconnect)

 

Media mode (unknown, interactive voice, automated voice)

 

Echo cancellation [a] [d]

 

 

Real time protocol (RTP) [a] [d]

 

 

Comfort noise generation (CNG) [a] [d]

 

 

Voice activity detection (VAD) [a] [d]

 

 

Dynamic anti-jitter buffer [a] [d]

 

 

VoIP processing [a]

 

 

Transparent D-channel

 

X.25/D-channel including AO/DI support

 

Notes:
[a] These features are not available with Dialogic® Diva® PRI/E1/T1-CTI Media Boards.
[b] PIAFS support is not available with Dialogic® Diva® BRI-2FX Media Boards.
[c] Including T.90/ISO8208 and module mode detection.
[d] These features are not available with the Dialogic® Diva® BRI-2FX Media Board.
[e] CAPI 2.0 (Dialogic® Diva® API) supports X.25 in the B- and D-channel, permanent virtual connections (PVC) and switched virtual connections (SVC), and multiple logical connections per B-channel.
[f] DTMF tone detection and transmission is done via soft DTMF for the Dialogic® Diva® PRI/E1/T1-CTI Media Boards.[g] These features are not available with Dialogic® Diva® V-PRI Media Boards. For Dialogic® Diva® V-1PRI, V-2PRI, V-4PRI, and V-8PRI Media Boards, features are available via licenses.
[h] Dialogic® Diva® UM-Series Media Boards support fax up to V.34 on 50% of the available channels.