Installation and Configuration

Notes:

• If you upgrade from the Diva System Release software v8.3, the existing configuration cannot be used due to structural changes. A backup of the configuration is stored under divas_cfg.rc.8.3.

• The Diva softIP Software is installed together with the Diva System Release software package.

• The Diva softIP Software cannot be used on a Terminal Server.

The following steps provide an overview of the installation and configuration procedure for the Diva System Release software:

1. Install your Diva Media Board and connect it to the network. For further information on the hardware installation, refer to the Diva Media Board Installation Guide that came with your Diva Media Board.

2. Install the Diva System Release software package. For further information, see Software Installation.

3. Configure the Diva System Release software using the Config Configuration Wizard located in the /usr/lib/opendiva/divas directory. For further information, see Configuring the Dialogic® Diva® System Release Software.

4. Confirm the operation of your Diva Media Board. For further information, see Testing the Dialogic® Diva® Media Board Functionality and Connectivity.

5. Configure the Diva System Release software TTY devices. For further information, see Configuring the Dialogic® Diva® TTY Ports.