The following requirements have to be met for the installation of the Diva System Release software:
A PC-compatible computer (Pentium processor or higher with at least 500 MHz and 128 MB RAM). For Dialogic® Blue™ Telephony Boards see notes below. Verify specific requirements for your Diva Media Board at the Dialogic web site (http://www.dialogic.com).
An installed Linux system
At least 500 MB of free space on the drive on which your Linux system is installed
An installed Diva Media Board, Dialogic® Blue™ Telephony Board, or valid licenses for the Diva softIP for SIP.
Notes for Dialogic® Blue™ Telephony Boards:
To operate at least one Dialogic Blue Telephony Board, you need a 2GHz XEON Core processor. With this processor type you need 24% processor performance using one core of a 2 GHz XEON processor.
Up to two Dialogic Blue Telephony Boards are tested in a system. Since the hardware of the Telephony Boards is a passive design, the features of the boards are executed on the CPU of the PC host. Therefore, the number of supported boards depends on the speed of the host CPU and the performance need of the application.
If you use a 128ms Echo Canceller, the processor performance consumption increases to approximately 44% using one core of a 2GHz XEON processor.