Dialogic® Diva® Media Board Management Interface

The Diva Media Board management interface is located on the Diva Media Board. It is structured like a virtual file space, containing directories and variables. Each directory and variable is identified by its path and name. A path contains a directory name followed by a specific variable or subdirectory that is separated by a backslash "\".

The Diva Media Board management interface contains the following directories:

Management interface root directory

Name	Type	Attribute	Description
CardType	MI_UINT	RO	Dialogic® Diva® Media Board type
MIF Version	MI_HINT	RO	Version number of the management interface
Build	MI_ASCIIZ	RO	Name and build number of the protocol file
Events down	MI_UINT	EVENT	Any variable's event tracing is paused until internal resources are re-available
Info	MI_DIR
Config	MI_DIR		Selected protocols and their parameters, hardware state. This directory is especially designed to use with other configuration tools like CfgLib
Statistics	MI_DIR		Statistics counters etc.
State	MI_DIR		State of B-channels
StateT	MI_DIR		State of time slots
Trace	MI_DIR		Trace functions (every application instance will receive an individual copy of the trace information)

Management interface info directory

Name	Type	Attribute	Description
CardType	MI_UINT	RO	Diva Media Board type
SerialNumber	MI_UINT	RO	Serial number of Diva Media Board
InterfaceNr	MI_UINT	RO	XXX
BoardRevision	MI_UINT	RO	Hardware revision of Diva Media Board
SubFunction	MI_UINT	RO	Sub-function
SubDevice	MI_UINT	RO	XXX
ProtocolBuild	MI_ASCIIZ	RO	XXX
DSPCodeBuild	MI_ASCIIZ	RO	XXX
PRI	MI_BOOLEAN	RO	Diva PRI Media Board or Diva BRI Media Board
Channels	MI_UINT	RO	Number of channels
AnalogChannels	MI_UINT	RO	Number of channels with modem capability
PCIDMA	MI_BOOLEAN	RO	Successfull test of PCI DMA capability
IndentifyStart	MI_EXECUTE	RO	Start Diva Media Board identification procedure
DSPState	MI_BITFLD	RO	Bit field to identify presence of DSPs

Management interface statistics\Outgoing calls directory

Name	Type	Attribute	Description
Calls	MI_UINT	EVENT	Number of requested calls
Connected	MI_UINT	EVENT	Number of successful calls
User busy	MI_UINT	RO	Number of calls refused because the user was busy
No Answer	MI_UINT	RO	Number of calls refused because remote station did not answer
Wrong Number	MI_UINT	RO	Number of calls refused because an invalid number was dialed
Out of Order	MI_UINT	RO	Number of calls refused because remote station was out of order
Incompatible Dst	MI_UINT	RO	Number of calls refused because of incompatible destination
No Channel Avail	MI_UINT	RO	Number of calls refused because no channels were available
Call rejected	MI_UINT	RO	Number of calls refused because remote station rejected the call
Other failures	MI_UINT	RO	Number of calls refused because of other reasons than the ones listed above
Clear values	MI_EXECUTE		Resets the values in this directory

Management interface statistics\incoming calls directory

Name	Type	Attribute	Description
Calls	MI_UINT	EVENT	Number of incoming calls
Connected	MI_UINT	EVENT	Number of accepted calls
User busy	MI_UINT	RO	Number of calls refused because the user was busy
Call rejected	MI_UINT	RO	Number of calls refused because they were rejected
Wrong number	MI_UINT	RO	Number of calls refused because an invalid number was dialed
Incompatible Destination	MI_UINT	RO	Number of calls refused because the destination was not compatible with the TE
Out of Order	MI_UINT	RO	Number of calls refused because destination was out of order
Ignored	MI_UINT	RO	Number of calls refused because the call was ignored
Other failures	MI_UINT	RO	Number of calls refused because of other reasons than the ones listed above
Clear values	MI_EXECUTE		Resets the values in this directory

Management interface statistics\B/D-Layer1/2 directory

Name	Type	Attribute	Description
X-Frames	MI_UINT	RO	Number of frames sent
X-Bytes	MI_UINT	RO	Number of bytes sent
X-Errors	MI_UINT	RO	Number of detected transmit errors
R-Frames	MI_UINT	RO	Number of received frames
R-Bytes	MI_UINT	RO	Number of received bytes
R-Errors	MI_UINT	RO	Number of detected receive errors

Management interface trace directory

Name	Type	Attribute	Description
B-Ch# Enable	MI_BITFLD	W	Bit field to enable specific B-channels
Debug Level	MI_HINT	W	Upper limit of debug events to log
D-HW Txt Mask	MI_BITFLD	W	D-channel hardware trace mask
B-HW Txt Mask	MI_BITFLD	W	B-channel hardware trace mask
Misc Txt Mask	MI_BITFLD	W	Trace mask for various use
Event Enable	MI_BITFLD	W	Bit field to enable specific trace events
Max Log Length	MI_UINT	W	Maximum number of data bytes in trace
Log Buffer	MI_TRACE	EVENT	Trace information: L1, D-channel, B-channel and debug information