General hardware specifications

Form factor

6U CompactPCI per PICMG 2.0

PCI bus

32/64-bit 66, 100-133 MHz PCI-X bus or 33, 66 MHz PCI bus

T1/E1 input/output

Through a rear I/O transition board

Ethernet input/output

Through a rear I/O transition board or PICMG 2.16 backplane

Board weight

Main board: 0.75 lb (0.36 kg)

Rear transition board: 0.55 lb (0.24 kg)

Processors

There are a variety of configurations available for the CG 6565C board. The DSPs are Texas Instruments TMS320C5441s. There are four cores per DSP. Each DSP core executes 133 MIPS.

Capacity

Up to 480 ports of channel associated signaling.

Physical

Dual 10/100/1000Base-T Ethernet interfaces

Protocols

ARP

ICMP

IPSec

IPv4

IPv6

RTP/RTCP

UDP

Physical

T1/E1 interface with MD1  RJ-21 on rear I/O transition board

Protocols

ISDN

CAS

Capacity

Up to 480 ports

Approvals

Refer to www.dialogic.com/declarations/default.htm for a list of countries where Dialogic has obtained approval for the board.

Physical

H.110 CT bus on J4

Controller

Proprietary TSI

Development environment

NaturalAccess

Hot Swap

Per PICMG 2.1

Operating system

Windows

UNIX

Red Hat Linux

Electrical

CompactPCI bus designed to the CompactPCI PICMG specification revision 2.1

Mechanical

Designed to the CompactPCI PICMG specification revision 2.1 for 6U style cards

Maximum number of ports per chassis

Limited by host processor resources

I/O

PCI bus master/slave with DMA

Addresses/interrupts

Address and interrupts automatically configured by CompactPCI BIOS (no jumpers or switches)

Plug and play

Compatible on Windows

Operating temperature

0 to 50 ° C

Storage temperature

-20 to 70 ° C

Humidity

5 to 80%, non-condensing

CG 6565C board in reset

1.93 A maximum @ 3.3 V

3.3 A maximum @ 5.0 V

0.1 A maximum @ 12 V

CG 6565C board active

6.0 A maximum @ 3.3 V

4.5 A maximum @ 5.0 V

0.1 A maximum @ 12 V