This topic presents selected specifications of the CG 6060C board:
|
Form factor |
6U CompactPCI per PICMG 2.0 |
|
PCI bus |
32 bit 33 or 64 MHz PCI bus |
|
T1/E1 input/output |
Through a rear I/O transition board |
|
Ethernet input/output |
Through a rear I/O transition board or PICMG 2.16 backplane |
|
Board weight |
Main board: 0.75 lb (0.36 kg) Rear I/O transition board: 0.55 lb (0.24 kg) |
|
Processors |
There are a variety of configurations available for the CG 6060C board. The DSPs are Texas Instruments TMS320C5441s. There are four cores per DSP. Each DSP core executes 133 MIPS. |
|
Capacity |
Up to 120 ports of universal port media processing. Up to 480 ports of channel associated signaling. |
|
Physical |
Dual 10/100Base-T Ethernet interfaces |
|
Protocols |
ARP ICMP IPSec IPv4 IPv6 RTP/RTCP UDP |
|
Physical |
Four-trunk variant: T1/E1 with four RJ-48C interfaces on rear I/O transition board Eight-trunk variant: T1/E1 with eight RJ-48C interfaces on rear I/O transition board Eight-trunk variant: T1/E1 with one Dialogic® MD1 RJ-21 interface on a rear I/O transition board Sixteen-trunk variant: T1/E1 with two Dialogic® MD1 RJ-21 interfaces on rear I/O transition board |
|
Protocols |
ISDN CAS |
|
Capacity |
Up to 480 ports |
|
Approvals |
Refer to www.dialogic.com/declarations/default.htm for a list of countries where Dialogic has obtained approval for the board. |
|
Physical |
H.110 CT bus on J4 |
|
Controller |
Proprietary TSI |
|
Development environment |
NaturalAccess |
|
Hot Swap |
Per PICMG 2.1 |
|
Operating system |
Windows UNIX Red Hat Linux |
|
Feature |
Specification |
|---|---|
|
Electrical |
CompactPCI bus designed to CompactPCI PICMG specification revision 2.1. |
|
Mechanical |
Designed to the CompactPCI PICMG specification revision 2.1 for 6U style cards. |
|
Maximum number of ports per chassis |
Limited by host processor resources. |
|
I/O |
PCI bus master/slave with DMA. |
|
Addresses/interrupts |
Address and interrupts automatically configured by CompactPCI BIOS (no jumpers or switches). |
|
Plug and Play |
Compatible on Windows. |
Flexible connectivity between T1/E1 trunks, DSPs, and H.110 bus
Switchable access to any of 4096 H.110 timeslots
H.110 clock master or clock slave (software-selectable)
Compatible with any H.110-compliant telephony interface
|
Feature |
Description |
|---|---|
|
Operating temperature |
0 to 50 ° C |
|
Storage temperature |
-20 to 70 ° C |
|
Humidity |
5 to 80%, non-condensing |
|
Board model |
+3.3 V current requirement |
+5 V current requirement |
+12 V current requirement |
|
CG 6060C/16-2L/4 TE |
active: 2.13 A maximum reset: 0.84 A maximum |
active: 0.72 A maximum reset: 0.47 A maximum |
active and reset: |
|
CG 6060C/32-2L/4 TE |
active: 2.21 A maximum reset: 0.94 A maximum |
active: 0.89 A maximum reset: 0.60 A maximum |
active and reset: |
|
CG 6060C/42-2L/4 TE |
active: 2.25 A maximum reset: 0.99 A maximum |
active: 0.98 A maximum reset: 0.66 A maximum |
active and reset: |
|
CG 6060C/11-2L/8 TE |
active: 2.32 A maximum reset: 0.76 A maximum |
active: 0.64 A maximum reset: 0.32 A maximum |
active and reset: |
|
CG 6060C/21-2L/8 TE |
active: 2.46 A maximum reset: 0.91 A maximum |
active: 0.80 A maximum reset: 0.54 A maximum |
active and reset: |
|
CG 6060C/11-2L/16 TE |
active: 3.36 A maximum reset: 0.79 A maximum |
active: 0.65 A maximum reset: 0.33 A maximum |
active and reset: |
|
CG 6060C/21-2L/16 TE |
active: 3.49 A maximum reset: 0.94 A maximum |
active: 0.81 A maximum reset: 0.55 A maximum |
active and reset: |
|
CG 6060C/42-2L/16 TE |
active: 3.57 A maximum reset: 1.05 A maximum |
active: 0.99 A maximum reset: 0.67 A maximum |
active and reset: |