Dialogic® Brooktrout® Tested FoIP Interoperability

Dialogic® Brooktrout® SR140

The Dialogic® Brooktrout® SR140 FoIP Fax Software products are compliant to the IETF SIP standard and follow T.38 and H.323 ITU recommendations. Solutions created using Brooktrout SR140 software will interoperate with equipment that also properly adheres to these standards/recommendations. However, given that not all implementations of T.38 are guaranteed to be alike, Dialogic has provided the below list of equipment and SIP trunks that we have successfully tested. This list should be considered a subset of the equipment and SIP trunks that are interoperable with Dialogic® Brooktrout® Fax Products. We are continually expanding this list as we access and verify interoperability with more FoIP network equipment and SIP trunks, so please check back frequently.

SIP Trunks

  • Allstream
  • AT&T IP Flex Reach SIP Trunking Service
  • babyTEL
  • BroadSoft BroadWorks SIP Trunking Service
  • Broadview Networks Broadspeed SIP Trunking Service
  • BroadVox GO! SIP Trunking Service
  • Gamma
  • Global Crossing
  • Level 3
  • Node4
  • T38Fax.com
  • Verizon
  • XO

Network Elements

Cisco

  • Cisco Unified Communication Manager (Cisco Unified CallManager)
    • SIP, H.323, & (MGCP via CallManager)
    • release 4.2.x or later
  • Cisco Integrated Services Router (IOS based gateways capable of supporting T.38)
    • SIP, H.323, & (MGCP via CallManager)
    • IOS version 12.3 or later
    • T.38 V.34 supported on IOS 15.1.1T or later
  • Cisco AS Universal Gateway Series (those capable of supporting T.38)
    • SIP, H.323, & (MGCP via CallManager)
    • IOS version 12.3 or later
  • Cisco High Performance Gatekeeper Series (H.323 IOS Gatekeepers)
    • H.323
    • IOS version 12.3 or later
  • Cisco Unified Communications 500 Series for Small Business
    • SIP and H.323
    • IOS version 12.4 or later
  • Cisco SPA2102-NA ATA
    • SIP
    • Software version 3.3.6 or later
    • Note: at the time of testing the maximum T.38 protocol supported by the Cisco SPA2102 ATA was V.17 (14,400 bits/sec); Error Correction Mode (ECM) was not supported
  • Cisco Unified Border Element (CUBE) with Cisco 2911
    • SIP
    • CUBE version 9.x or later
    • IOS version 15.2-3.T1 or later

Avaya

  • Avaya IP Office
    • SIP
    • IP Office 500 hardware with VCM 32 (T.38 support) with the third-party SIP endpoint license
    • Release 6.0 or later
    • DevConnect Certified, Release 7.0
  • Avaya Aura Communication Manager
    • H.323, SIP (CM release 5.0 or greater)
    • Release 3.01 (with update 628.6-11410) or later within the 3.x codeline
    • Release 4.03 or later within the 4.x codeline
    • Release 5.0 or later within the 5.x codeline
    • Release 6.0 or later within the 6.x codeline; DevConnect Certified, Release 6.0.1
    • Note: At time of testing, Communication Manager did not support Error Correction Mode (ECM)
  • Avaya Media Gateway Series (those capable of supporting T.38)
    • H.323, SIP
    • Firmware version 26.31.0 or later

3Com

  • 3Com VCX V7000 platform
    • SIP
    • Software version 9.0.7 or later
  • 3Com Media Gateway
    • SIP
    • Software version 4.40.211.387 or later

Aastra Technologies/Mitel

  • MX-ONE Telephony System
    • SIP
    • Release V3.2 SP1 or later
  • The MX-ONE Telephony System includes:
    • MX-ONE Manager Telephony System version 8.48.1
    • MX-ONE Telephony Server version 12.45.6
    • MX-ONE Media Gateway Classic version 1.4_5

Alcatel

  • Alcatel OmniPCX Enterprise
    • SIP, H.323
    • Release 7.1 or later
    • Certified with Release 9.1
  • Alcatel OmniPCX Office (OXO)
    • SIP
    • Release 7.0 or later

AudioCodes

  • Mediant
    • SIP (using UDP)
    • Software version 5.00A or later
  • MP-114
    • SIP (using UDP)
    • Software version 5.60A or later

BroadSoft

  • Achieved BroadSoft validation on BroadWorks Release 18.SP1 with Dialogic® Brooktrout® Fax Software SDK 6.5.2

Grandstream

  • Grandstream HT-502 ATA
    • SIP
    • V1.1C or later
  • Grandstream GXW4024IP Analog Gateway
    • SIP
    • V0.4A or later

Linksys

  • Linksys SPA 8000 Gateway
    • SIP
    • Software version 5.1.10 or later
    • Hardware version 1.0.0 or later

Mitel

  • Mitel 3300 MXe
    • SIP
    • Mitel 3300 MXe controller software version 9.0.3.15 or later (SDK 6.3.4 or higher is required when using MXe controller software version 10)
    • Prerequisites: The DSP II module, T.38 licenses, and SIP trunk licenses must be installed and enabled
  • MX-ONE Telephony System (formerly Aastra Technologies)
    • SIP
    • Release V3.2 SP1 or later
    • The MX-ONE Telephony System includes:
      • MX-ONE Manager Telephony System version 8.48.1
      • MX-ONE Telephony Server version 12.45.6
      • MX-ONE Media Gateway Classic version 1.4_5

Multi-Tech

  • MultiVoIP MVP210
    • SIP
    • Multi-Tech MVP210 firmware version 6.11.27-07-Aug-09 or later

NEC

  • NEC Philips SOPHO iS3000
    • SIP
    • Version 2010v1.609 or later

Nortel

  • Nortel Communication Server 1000 Release 5.5
    • SIP
    • Release 5.5 or later

Patton

  • Patton 4960 PRI Gateway
    • SIP
    • R5.4 2009-07-20 or later
  • Patton 4554 BRI Gateway
    • SIP
    • R5.3 2009-05-20 or later

Quintum

  • Quintum Tenor Series
    • SIP, H.323
    • Release P104-12-10 or later

ShoreTel

  • ShoreGear 220T1A Switch
    • SIP
    • Software Release 13.3, build 18.61.8701.0
    • Software Release 12.1, build 17.22.5240.0
    • Software Release 11.1, build 16.23.5609.0
    • Software Release 10, build 15.6.4207.0 (Controlled Release)
    • Note: At time of testing, maximum T.38 speed supported was V.29; requires Dialogic SDK 6.2.3 or later

Siemens

  • HiPath 4000
    • SIP
    • Release V6 R1.12.18 or later
  • HiPath 8000
    • SIP
    • Release V3.0 R2 PS19.E05 or later
  • RG8702 Media gateway
    • SIP

Dialogic Products

  • Dialogic® DMG 1000 & 2000 Series
    • SIP
    • Release 5.1.118_5n or later
  • Dialogic® DMG 4000 Series
    • SIP
    • SUI-1_8.51 or later
  • Dialogic® IMG 1010 Integrated Media Gateway
    • SIP, H.323
    • Release 10.3.2 or later
  • Dialogic® IMG 2020 Integrated Media Gateway
    • SIP Release 2.1.0 or later
  • Dialogic® BorderNet 3000 Session Border Controller
    • BN3000 SBC
    • SIP
    • Release C2.9.4.12 or later
  • Dialogic® BorderNet 4000 Session Border Controller
    • BN4000 SBC
    • SIP Release 2.1.0 or later

Virtualization

    VMware

  • SR140 only
  • VMware ESXi Server version 6.x or running any supported Windows or Red Hat Linux guest operating system
  • VMware ESXi Server version 5.x or running any supported Windows or Red Hat Linux guest operating system
  • VMware ESXi Server version 4.x or later running any supported Windows or Red Hat Linux guest operating system

    Hyper-V™

  • SR140 only
  • Windows Server 2012 Hyper-V Windows Server 2012 R2 Hyper-V running any supported Windows or Red Hat Linux guest operating system
  • Windows Server 2008 R2 Hyper-V running any supported Windows or Red Hat Linux guest operating system 

    Xen

  • SR140 only
  • Citrix XenServer v6.0 or later within the v 6.x product line, running any supported Windows or Red Hat Linux guest operating system
  • Citrix XenServer v5.5.0 or later within the v 5.x product line, running any supported Windows or Red Hat Linux guest operating system 

 

Field Tested FoIP Interoperability

Visit the Field Tested FoIP Interoperability page for a list of devices that are successfully being used by our SR140 customers.

Web Analytics