Dialogic® Brooktrout® SR140
The Dialogic® Brooktrout® SR140 FoIP Fax Software products are compliant to the IETF SIP standard and follow T.38 and H.323 ITU recommendations. Solutions created using Brooktrout SR140 softare will interoperate with equipment that also properly adheres to these standards/recommendations. However, given that not all implementations of T.38 are guaranteed to be alike, Dialogic has provided the below list of equipment and SIP trunks that we have successfully tested. This list should be considered a subset of the equipment and SIP trunks that are interoperable with Dialogic® Brooktrout® Fax Products. We are continually expanding this list as we access and verify interoperability with more FoIP network equipment and SIP trunks, so please check back frequently.
SIP Trunks
- babyTEL
- Broadview Networks Broadspeed SIP Trunking Service
- Note: At time of testing, Broadspeed SIP Trunking Service did not support Error Correction Mode (ECM)
- BroadVox
- Global Crossing
- Node4
- XO
- XO SIP Trunking Service - XO Package 1
- Note: At time of testing, XO SIP Trunking service did not support Error Correction Mode (ECM)
Network Elements
Cisco
- Cisco Unified Communication Manager (Cisco Unified CallManager)
- SIP, H.323, & (MGCP via CallManager)
- release 4.2.3 or later within the 4.2.x product line. H.323, MGCP
- release 5.0.4(a) or later within the 5.0.x product line. SIP
- release 6.0.1 or later within the 6.0.x product line. H.323, SIP, MGCP
- release 6.1.x or later within the 6.1.x product line. H.323, SIP, MGCP
- release 7.0.x or later within the 7.0.x product line. H.323, SIP, MGCP
- release 7.1.3 or later within the 7.1.x product line. H.323, SIP, MGCP
- release 8.0.2 or later within the 8.x product line, H.323, SIP, MGCP
- Cisco Integrated Services Router (IOS based gateways capable of supporting T.38)
- SIP, H.323, & (MGCP via CallManager)
- IOS version 12.3 or later
- T.38 V.34 supported on IOS 15.1.1T or later
- Cisco AS Universal Gateway Series (those capable of supporting T.38)
- SIP, H.323, & (MGCP via CallManager)
- IOS version 12.3 or later
- Cisco High Performance Gatekeeper Series (H.323 IOS Gatekeepers)
- H.323
- IOS version 12.3 or later
- Cisco Unified Communications 500 Series for Small Business
- SIP and H.323
- UC 520
- IOS version 12.4 or later
- Cisco SPA2102-NA ATA
- SIP
- Software version 3.3.6 or later
- Note: at the time of testing the maximum T.38 protocol supported by the Cisco SPA2102 ATA was V.17 (14,400 bits/sec); Error Correction Mode (ECM) was not supported
Avaya
- Avaya IP Office
- SIP
- IP Office 500 hardware with VCM 32 (T.38 support) with the third-party SIP endpoint license
- Release 6.0 or later
- DevConnect Certified, Release 7.0
- Avaya Aura Communication Manager
- H.323, SIP (CM release 5.0 or greater)
- Release 3.01 (with update 628.6-11410) or later within the 3.x codeline
- Release 4.03 or later within the 4.x codeline
- Release 5.0 or later within the 5.x codeline
- DevConnect Certified, Release 6.0.1
- Note: At time of testing, Communication Manager did not support Error Correction Mode (ECM)
- Avaya Media Gateway Series (those capable of supporting T.38)
- H.323, SIP
- Firmware version 26.31.0 or later
3Com
- 3Com VCX V7000 platform
- SIP
- Software version 9.0.7 or later
- 3Com Media Gateway
- SIP
- Software version 4.40.211.387 or later
Aastra Technologies
- Ericsson MX-ONE Telephony System
- SIP
- Release V3.2 SP1 or later
- The MX-ONE Telephony System includes:
- Ericsson MX-ONE Manager Telephony System version 8.48.1
- Ericsson MX-ONE Telephony Server version 12.45.6
- Ericsson MX-ONE Media Gateway Classic version 1.4_5
Alcatel
- Alcatel OmniPCX Enterprise
- SIP, H.323
- Release 7.1 or later
- Certified with Release 9.1
- Alcatel OmniPCX Office (OXO)
AudioCodes
- Mediant
- SIP (using UDP)
- Software version 5.00A or later
- MP-114
- SIP (using UDP)
- Software version 5.60A or later
Grandstream
- Grandstream HT-502 ATA
- Grandstream GXW4024IP Analog Gateway
Linksys
- Linksys SPA 8000 Gateway
- SIP
- Software version 5.1.10 or later
- Hardware version 1.0.0 or later
Mitel
- Mitel 3300 MXe
- SIP
- Mitel 3300 MXe controller software version 9.0.3.15 or later (SDK 6.3.4 or higher is required when using MXe controller software version 10)
- Prerequisites: The DSP II module, T.38 licenses, and SIP trunk licenses must be installed and enabled
Multi-Tech
- MultiVoIP MVP210
- SIP
- Multi-Tech MVP210 firmware version 6.11.27-07-Aug-09 or later
Nortel
- Nortel Communication Server 1000 Release 5.5
Patton
- Patton 4960 PRI Gateway
- SIP
- R5.4 2009-07-20 or later
- Patton 4554 BRI Gateway
- SIP
- R5.3 2009-05-20 or later
Quintum
- Quintum Tenor Series
- SIP, H.323
- Release P104-12-10 or later
ShoreTel
- ShoreGear 220T1A Switch
- SIP
- Software Release 10 Build 15.6.4207.0 (Controlled Release)
- Software Release 11.1 build 16.23.5609.0
- Note: At time of testing, maximum T.38 speed supported was V.29; requires Dialogic SDK 6.2.3 or later
Siemens
- HiPath 8000
- SIP
- Release V3.0 R2 PS19.E05 or later
- RG8702 Media gateway
Dialogic Products
Virtualization
VMware
- SR140 only
- VMware ESX Server version 3.0.1 or later running any support Windows guest operating system
- VMware ESXi Server version 4.0.0 or later running any supported Windows or Redhat Linux guest operating system
Windows Server® 2008 R2 Hyper-V™
- SR140 only
- Windows Server 2008 R2 Hyper-V version 6.1.7600.16385 running any supported Windows or RedHat Linux guest operating system
Xen
- SR140 only
- Citrix XenServer v5.5.0 or later within the v 5.x product line, running any supported Windows or RedHat Linux guest operating system