How to check if you have a Diva software license installed
Introduction
A software license is required if:
(a) you have a Diva software product installed such as:
- Dialogic® Diva® softIP for SIP Software
- Dialogic® Diva® softSS7 Software
- Dialogic® Diva® SIPcontrol™ Software
(b) you have a Diva board installed with additional functionality enabled via a license.
You can check whether you have a Diva software license in use on your system as described below.
WINDOWS:
Open the Diva Configuration Manager.
Any Diva board (physical or virtual) that has a license attached has a key shown on its icon. If the key is green, the license is valid. If the key is red, the license is invalid.
To check what type of license is activated, open the License Manager from the Tools menu:
All available licenses are listed on the left. Click on a license ID to display its details:
In this example, a Diva V-4PRI board is installed with a license for 120 V.34 fax channels.
LINUX:
- Using the GUI -
Log on to the server's web GUI (http://<ip_address>:10005 or https://<ip_address>:10006).
Select License Management from the bottom of the menu on the left:
Scroll down to the Boards section to see which Diva boards have licenses, and what each board is licensed for:
Click on 'View' to show the license details:
- Command Line -
Open a terminal on the server, and go to /usr/lib/opendiva/divas. Licenses are by default saved in one subfolder per board, in the ./licenses folder, for example:
To list the licensed features, run ./licman -p /usr/lib/opendiva/divas/licenses/*
To view details about an individual license, run ./licman -e /usr/lib/opendiva/divas/licenses/<board_subfolder>/<license-name>.lic, for example:
First published: 01-May-2015
Open access: Product rule: ; Page rule: Auto