changes_prev_reltoc

Navigating this Publication Set

Cantata Technology Excel Product Line Warranty

Changes from Previous Release

1 Changes from Previous Releases

Changes in Release 8.4.1 Controlled Introduction

Voice over IP (VoIP) Enhancements

SS7 Enhancements

DSP Enhancements

General Platform Enhancement

Changes in Release 8.4.1 Engineering Release 2

DSP Enhancements

CCS Enhancements

VoIP Enhancements

CSP Hardware Product Descriptions

CSP 2040 Chassis - CSN-CHA-1112/CSN-CHA-1112R

CSP 2090 Chassis - EXS-CHA-1100/EXS-CHA-1100R

CSP 2110 Chassis - EXSCHA1201/EXSCHA1201R

CSP 2090 Fan Tray, Front - LNXFTL0000/LNXFTL0000R

CSP 2090 Fan Tray, Rear - LNXFTR1000/LNXFTR1000R

CSP 2110 Fan Tray, Front - EXSFTL0111/EXSFTL0111R

CSP 2110 Fan Tray, Rear - EXSFTR1100/EXSFTR1100R

PSC-60 Card - CSN-PSC-1000/CSN-PSC-1000R

PSC-150 Card - EXS-PSC-1200/EXS-PSC-1200R

CSP Blockout Cards and Panels - See Part Numbers

2 Matrix Controller Series 3 Cards

Matrix Controller Series 3 Card - See Model Numbers

Matrix Controller Series 3 I/O Card - EXS-MIO-1300/ EXS-MIO-1300R

Debug Cable Assembly - Part Nos. 64-0046-00/164-0046-00

DS3 Card - EXS-DS3-1000/EXS-DS3-1000R

DS3 I/O Card - EXS-DS3-1100/EXS-DS3-1100R

DS3 Standby I/O Card - EXSDIO1200/EXSDIO1200R

DS3 Cable Assembly - Part Nos. 64-0124-00/164-0124-00

E-ONE Card - See Model Numbers

E-ONE 120 Ohm I/O Card - EXSEIO1000/EXSEIO1000R

E-ONE 120 Ohm Red I/O Card - EXSEIO1200/EXSEIO1200R

E-ONE 120 Ohm Standby I/O Card - EXS-EIO-1300/ EXS-EIO-1300R

E-ONE 75 Ohm I/O Card - EXSEIO1010/EXSEIO1010R

E-ONE 75 Ohm Red I/O Card - EXSEIO1210/EXSEIO1210R

E-ONE 75 Ohm Standby I/O Card - EXSEIO1310/EXSEIO1310R

J-ONE Card - See Model Numbers

J-ONE Redundant I/O Card - EXSJIO1200

J-ONE Standby I/O Card - EXSJIO1300

T-ONE Card - See Model Numbers

T-ONE 100 Ohm I/O Card - EXSTIO1000/EXSTIO1000R

T-ONE 100 Ohm Red I/O Card - EXSTIO1200/EXSTIO1200R

T-ONE 100 Ohm Standby I/O Card - EXSTIO1300/EXSTIO1300R

Telco Cable Assembly - See Part Numbers

4 Common Channel Signaling Cards

CCS I/O Card - EXS-CCS-1000/EXS-CCS-1000R

CCS I/O Series 3 Card - EXS7IO1300/EXS7IO1300R

CCS I/O Redundancy Cable Assembly - Part Nos. 64012301/ 164012301

CCS I/O Series 3 Red Cable - Part Nos. 64333300/164333300

DASS2/DPNSS Card - EXSDAS1000

ISDN PRI Card - LNX-PRI-1100

ISDN PRI Redundant I/O Card - LNXPIO1000

ISDN Series 3 Card - EXS-PRI-1300/EXS-PRI-1300R

SS7 Multi-Protocol I/O Card - EXS7IC1000

SS7 PQ Card - See Model Numbers

SS7 Series 3 Card - See Model Numbers

5 Internet Protocol Cards

IP Signaling Series 3 Card - EXS-SCS-1001/EXS-SCS-1001R

VDAC-ONE Card - See Model Numbers

VDAC I/O Card - EXS-VIO-1000/EXS-VIO-1000R

IP Network Interface Series 2 Card - See Model Numbers

IP Network Interface Series 3 Card - See Model Numbers

Multi-Function Media I/O Plus Card - CSP-BIO-1400R

Multi-Function Media I/O Card - CSP-BIO-1000/ CSP-BIO-1000R

6 Resource Cards

DSP-ONE Card - See Model Numbers

DSP Series 2 Card - See Model Numbers

DSP Series 2 Plus Card - See Model Numbers

Multi-Function Media I/O Card - CSP-BIO-1000/ CSP-BIO-1000R

Multi-Function Media I/O Plus Card - CSP-BIO-1400R

Subrate Controller (SRC) Card - LNXSRC1000

7 EXNET-ONE Card

EXNET-ONE Card - EXS-XIO-1200/EXS-XIO-1200R

EXNET Fiber Optic Cable - See Part Numbers

8 EXNET Connect PCI H.100 Card Hardware Product Description

EXNET Connect - EXS-CON-1210

CSP Hardware Installation and Maintenance

1 CSP 2040 Chassis Reference

Physical Specifications

Environmental Specifications

2 CSP 2090/CSP 2110 Chassis Reference

Physical Specifications

Environmental Specifications

3 CSP Chassis Installation

Installation Summary

Hardware Requirements

Pre-Installation Considerations

Unpack CSP Chassis

Powering CSP 2040

Powering CSP 2090 and CSP 2110

Connecting the CSP to Host

4 Card Installation

Card Installation

Power Supply Cards

Matrix Controller Series 3 Cards

Line and Standby Cards

Common Channel Signaling (CCS) Cards

DS3 I/O and Standby I/O Card Grounding

EXNET Connect PCI H.100 Card

5 Building a Multi-Node CSP

Pre-Installation Considerations

Sample Configurations

Multiple EXNET Rings

EXNET Fault Recovery and Redundancy

CSP In-Service Upgrades

Passive EXNET Ring Expansion

CSP Host Communication Redundancy

Node Information Form

6 CSP Maintenance

CSP 2040 Fan Tray

CSP 2090/CSP 2110 Fan Trays

Hot-Swappable Cards

Maintaining Spare Cards

Replacing RAM Backup Battery

Troubleshooting

A Industry Compliance

US Compliance Summary

FCC Regulatory Compliance Notices

Canadian Compliance Summary

IC Regulatory Compliance Notices

NEBS Compliance

European Compliance Summary

Switzerland Compliance

Japanese Compliance

Australian Compliance

Hong Kong Compliance

Taiwan Compliance

Mexican Compliance

European Declarations of Conformity

RoHS Declaration of Compliance

SwitchKit CSA User’s Guide

1 Getting Started

Highlights of the Converged Services Administrator

SwitchKit Features and Components

Supported Operating Environments

Installing the CSA

CSA Conventions

2 Basic Configuration - System/Node

Opening a Configuration File

Reading a Configuration from SwitchManager

Converting Older Configuration Files

Saving a Configuration

Configuring the CSP Using an Existing *.cfg File

Adding a Node Offline

Adding a Node Online

Updating or Deleting a Node Online or Offline

Adding Cards to a Node

Removing a Card

Resetting Card Configuration

Resetting All Card Configuration

General System Configuration

Setting a Point Code Format

General Node Configuration

Configuring Multiple Hosts

Configuring Loop Timing

Configuring Synchronization Priority List

Editing the Configuration Table Entries

Specifying PPL Files

The Process PPL Events Menu

3 Configuring Line Cards, Spans, and Channels

Configuring the DS3 Card

Configuring the E-ONE Card

Configuring the J-ONE Card

Configuring the T-ONE Card

Configuring Virtual Cards

Configuring Channel Groups

Using the Route Control Tool

Deleting, Adding or Modifying Channels

4 Configuring Signaling Cards

Configuring the ISDN Card

Configuring V5.2

Configuring the SS7 Card

Dual Port Usage for SS7 Series 3 Card

Clearing SS7 Deconfiguration Messages

Configuring SS7 M3UA

Configuring SS7 ISUP/TUP Message Formats

Configuring SCCP/TCAP on an SS7 card

Configuring the SS7 Multi-Protocol I/O Card

5 Configuring VoIP Cards and Features

Configuring VDAC-ONE

Configuring IP Network Interface Series 2/3 Cards

Configuring Gateway Mode

Configuring RFC 2833

Configuring SIP

Configuring the Call Agent

Configuring H.323

6 Configuring Resource Cards

Configuring the DSP-ONE Card

Configuring a DSP Series 2 Card

Configuring a DSP Series 2 Plus Card

Configuring DSP Alarm Thresholds

Configuring an EXNET-ONE

Adding an EXNET Connect Node Online

Configuring Call Progress Tones and Attributes

7 System Provisioning and Monitoring

Connecting to the LLC

Changing Environment Variables at Run-time

Querying Environment Variables

Refreshing a Configuration from SwitchManager

Card Views in Monitoring Mode

Line Card Views

VoIP Card Views

Matrix Controller Card View

Viewing Line Card Resource Utilization

Setting Line Card Resource Thresholds

Viewing a DSP Series 2 Card

Viewing a DSP Series 2 Plus Card

Querying DSP Series 2 Statistics

Querying Parent Conferences

Querying Child Conferences

Querying M3UA Properties

Resetting a Module on a VDAC card

Setting Ethernet Link Redundancy on a DSP Series 2 card

Querying Active Ethernet Interface

Enable Ethernet Redundancy

Disable Ethernet Redundancy

Performing an Ethernet Redundancy SwitchOver

Querying Card Properties

Resetting a Card

Querying and Setting a Tag on a Card

Viewing an EXNET Connect Node on a Ring

Querying ISDN D Channels

Monitoring, Removing & Querying V5.2 Entities

Querying the Status of a V5.2 C Channel

Querying the Status of a V5.2 User Port

Blocking/Unblocking V5.2 Links & User Ports

Changing the Event View

Menu for Monitoring Channels

Querying SIP Configuration

Querying SIP Registrations

Querying H.323 Configuration

Querying Multi-Host Connections

Monitoring Mode Status Indicators

Viewing a Multi-Node Ring

Loopback Options on a DS3 or T-ONE Card

Viewing or Changing DS3 Configuration

Querying SS7 Redundancy

Sending Messages to the CSP

Performing Standby Card Switchover

Performing an LLC Switchover

Using Dynamic Configuration

Adding a Node to a Multi-Node System

SwitchKit Installation and Maintenance Guide

Cantata Technology Excel Product Line Warranty

1 SwitchKit Product Introduction

SwitchKit Product Description

SwitchKit Features and Components

LLC - The Low-Level Communicator

The SwitchManager

SwitchKit Application Programming Interface

CSA - Converged Services Administrator

The Simple Network Management Protocol Agent

SwitchKit Supported Operating Environments

Downloading Or Upgrading System Software

SwitchKit Software Licensing

Installing SwitchKit on UNIX

Installing SwitchKit on Windows

Running SwitchKit Automatically at Startup on Windows

SwitchKit Tray Icons on Windows

Installing the CSA

Environment Variables Modify SwitchKit Default Behavior

Setting Environment Variables on Windows NT 4.0

Setting Environment Variables on Windows XP

List of Environment Variables

3 Running SwitchKit Components and Companion Products

Running the LLC

Running Redundant LLCs

Basics of SwitchManager

Starting SwitchManager

Starting SwitchManager with tandem.cfg

SwitchManager Arguments

4 Redundancy Setup

SwitchKit Redundancy

Failure Scenarios Resolved with Redundancy

5 Building a Configuration File

Building a Configuration File

API Messages Used for Configuration

Configuration Message Syntax

6 Logging and Configuration Updates

Log File Management

Updating Configuration

7 Device Connectivity

Add LLC Node Feature

Connecting LLC to an SS7 card

TCAPMessageRegister

TCAP Routing Feature

LLC: Application Load Balancing for TCAP

Matrix ConfigureDS Configure : DeviceServerEx

8 Controlled Line Card Switchover

Controlled Line Card Switchover Feature

SwitchBackFromStandby

9 Server Status Change

Server Status Change Feature

ServerStatusChange

10 Configuration Tutorial

Tandem Configuration

Frequently Asked Questions

Example Configuration File

SwitchKit Programmer’s Guide

1 SwitchKit Application Programming Interface

Using SwitchKit API

API Messages Used for Call Control Programming

2 Connection Management

Introduction to Connection Management

Applications Connecting to Multiple LLCs

sk_createConnectionWithID()

sk_*OnConnection()

Additional Functions to Connect to Multiple LLCs

Connecting Legacy Applications to Multiple LLCs

sk_createConnection()

sk_createConnectionWithID()

Additional Functions for Legacy Applications

Applications Connecting to One LLC

sk_initializeConnection() / sk_initializeForcedConnection()

Additional Functions used with One LLC

Functions used in all Connection Models

APIs used in all Connection Models

3 Channel Management

SK_AllAssignedChannels

sk_associateChannelGroup()

sk_broadcastLoad()

sk_clearChannelGroup()

sk_configChannelGroup()

sk_getAssignedChannelGroup()

sk_ignoreChannelGroup()

sk_monitorChannel() / sk_unMonitorChannel()

sk_removeChannelsFromGroup()

sk_requestChannel()

sk_requestOutseizedChannel()

sk_requestRouteControlledChannel()

sk_returnChannel()

sk_setChannelHandler()

sk_setChannelData() / sk_getChannelData()

sk_setGroupHandler()

sk_watchChannelGroup()

API messages used for Channel Management

4 Register Functions

sk_appGroupRegister()

sk_msgRegister() / sk_msgUnRegister()

sk_pplComponentRegister() / sk_pplComponentUnRegister()

sk_pplTCAPRegister() / sk_pplTCAPUnRegister()

5 Logging Functions

sk_getMsgName()

sk_logMessage()

sk_setSilentMode()

6 Handler Functions

Handler Functions

sk_popChannelHandler()

sk_pushChannelHandler()

sk_removeChannelHandler()

sk_setChannelHandler()

sk_setDefaultHandler()

sk_setGroupHandler()

sk_pushDefaultHandler()

sk_popDefaultHandler()

sk_removeDefaultHandler()

sk_setLLCConnectionHandler()

sk_removeLLCConnectionHandler()

sk_popDefaultTCAPHandler()

sk_popTCAPHandler()

sk_pushDefaultTCAPHandler()

sk_pushTCAPHandler()

sk_removeDefaultTCAPHandler()

sk_removeTCAPHandler()

sk_setDefaultTCAPHandler()

sk_setTCAPHandler()

sk_unlockTCAPHandlers()

7 Message Functions

Message Headers in C

Message Structure Macros

Message Macros for C Programmers

Instantiating a Large SwitchKit Message

Messages in C++

Message Class Macros

sk_packAutoStorage()

sk_packMessage()

sk_sendMessage()

sk_sendMessageWithHandler()

sk_sendMessageWithTag()

sk_sendMsgStruct()

sk_unpackAutoStorage()

sk_unpackMessage()

sk_rcvAndDispatch()

sk_rcvAndDispatchAutoStorage()

sk_rcvMessage()

8 Utility Functions

sk_extractExtendedICBFromChannelReleasedWithData()

sk_getManagedFile()

sk_getMessageText()

sk_getMsgName()

sk_getMsgSizeFromTag()

sk_getVersionMajor() / sk_getVersionMinor() / sk_getVersionBuild()/ sk_getVersionRelease()

sk_statusText()

sk_unparseAlarm()

sk_unparseAlarmCleared()

sk_unparsePPLEventIndication()

9 Addressing Functions

AIB Manipulation Functions

Addressing Functions

sk_activateExnetMatrix()

sk_registerAsRedundantApp() / sk_deregisterAsRedundantApp()

LLC and Application Redundancy

API Messages used for Redundancy

11 Programming Tips & Examples

Parsing of AIBs

Advanced Programming Technique in UNIX

Simple Tandem and CallSim

Building the Application

Running the Application

12 Threadsafe SwitchKit API

Threadsafe Introduction

Sample Applications

Other Changes Developers Must Make When Using Threadsafe SK API

Dos and Don’ts of the ThreadSafe SwitchKit Library

Intelligent Network & Wireless Protocols Overview

1 Intelligent Network and Wireless

Supported Operating Environments and Compatibility

Intelligent Network and Wireless Protocols

SwitchKit Intelligent Network and Wireless Components

Benefits of using SwitchKit to develop an IN/Wireless Application

IN and Wireless Call Flows

Wireless Call Flow

Licensing of Intelligent Network and Wireless Protocols

SwitchKit TCAP Interface User’s Guide

1 Introduction to SwitchKit TCAP Interface API

SwitchKit TCAP API Architecture

SKIM and SKTAL API

SKIM and SKTAL API Call Flow

2 SwitchKit Interface Module

SKIM API Messaging

SSNOutOfService()

CancelOperation()

SendPreArrangedEnd()

SetTransHandler()

ClearTransHandler()

EnableTracing()

DisableTracing()

3 SKIM Parameter Classes

SKIM_Trans Class

SKIM_Trans Class Methods

SKIM_Operation Class

SKIM_Operation Class Methods

SKIM_Notify Class

SKIM_Notify Class Methods

SKIM_CallingPartyAddress / SKIM_CalledPartyAddress Class

SKIM_CallingPartyAddress/SKIM_CalledParty Address Class Methods

4 SKIM Sample Application

Environment Variables for Sample Applications

Step One: Creating a connection with LLC using SwitchKit

Step Two: Creating an Instance of SKIM API Class

Step Three: Sending a TCAP Transaction

Step Four: Receiving a TCAP Transaction

Step Five: Receiving Notifications

Step Six: Terminating SKIM API Object Disconnection

5 SwitchKit TCAP Abstraction Layer

SwitchKit TCAP Abstraction Layer Messaging API

sktal_initializeTCAP()

sktal_terminateTCAP()

sktal_getTCAPHandle()

sktal_registerTCAPSSNHandler()

sktal_unregisterTCAPSSNHandler ()

sktal_setTCAPDialogueHandler ()

sktal_clearTCAPDialogHandler()

sktal_allocateTCAPDialogID()

sktal_sendTCAPDialog()

sktal_recvTCAPDialog()

sktal_sendTCAPComponent()

sktal_recvTCAPComponent()

6 SKTAL Parameter Classes

Class TCAP_Component

Class TCAP_Invoke : public TCAP_Component

Class TCAP_Result : public TCAP_Component

Class TCAP_Error : public TCAP_Component

Class TCAP_Reject : public TCAP_Component

Class TCAP_Cancel : public TCAP_Component

Class TCAP_ResetTimer : public TCAP_Component

Class TCAP_Dialogue

TCAP_Unidirectional : public TCAP_Dialogue class

Class TCAP_Begin : public TCAP_Dialogue

Class TCAP_Continue : public TCAP_Dialogue

Class TCAP_End: public TCAP_Dialogue

Class TCAP_Abort : public TCAP_Dialogue

ClassTCAP_Notice : public TCAP_Dialogue

7 SKTAL Sample Application

Step One - Creating a connection with LLC using SwitchKit APIs

Step Two - Initializing SKTAL and registering SSN

Step Three - Sending a TCAP Dialogue and Component

Step Four - Receiving a TCAP Transaction

Step Five - Terminating SKTAL and Disconnection

A Appendix - TCAP Codes

ANSI TCAP Codes

B Appendix - SKIM Data Types and Codes

SKIM Data Types and Codes

C Appendix - SKTAL Data Types and Codes

SKTAL Data Types

D Appendix - SKTAL Dialog and Component Structure Definitions

SKTAL_DLG and SKTAL_CPT Structure Definitions

E Appendix - SKIM and SKTAL API Integration with IntelliNet Codecs

Integrating SKIM and SKTAL API with IntelliNet Codecs

SwitchKit SNMP User’s Guide

1 SNMP Introduction

SNMP Agent Overview

CSP SNMP Agent MIB

SNMP Components

Viewing CSP Alarms in HP Openview

Installing the SNMP Agent on Windows

Verifying the SNMP Installation on Windows

Installing the SNMP Agent on a Solaris SPARC

Verifying the SNMP Installation on a Solaris SPARC

Uninstalling the SNMP Agent on Solaris SPARC

Uninstalling the SNMP Agent on Windows

SNMP Configuration: Valid Queries

3 Troubleshooting

Troubleshooting the SNMP Agent on Windows

Troubleshooting the SNMP Agent on a Solaris SPARC

4 System Customization

Changing Destination of Notifications on Windows

Adding a Destination for Notifications on Windows

Changing the Password on Windows

Editing Fields in Configuration File on Windows

Changing the Notifications Version

Changing the Destination of Notifications on Solaris SPARC

Adding a Destination for Notifications on Solaris SPARC

Changing the Password on Solaris SPARC

Editing Fields in Configuration File on Solaris SPARC

CSP Developer’s Guide: Overview

1 Introduction to the CSP

Converged Services Platform

System Overview

Fault Tolerance through Redundancy

Software Overview

2 Licensing Overview

General Licensing Information

System Software Licensing

Software Modules That You Can License

Hardware Modules That You Can License

3 Getting Started

Installing and Configuring a TFTP Server

Installing and Configuring a BOOTP Server

Download Scenarios

Configuring a Shared IP Address Using BOOTP Server

Configuring a Shared IP Address Using DHCP Server

Configuring Dual Ethernet Ports on IP Signaling and Matrix Controller I/O Cards

Robust Ethernet Redundancy

Multi-Host Control

Downloading System Software

Creating a TFTP Configuration File

Changing System Software Version

Card DIP Switch Selectable Functionality

4 EXS API Application Development

Note to SwitchKit Users

Configuration Guidelines

The Core Message Set

API Message Guidelines

Configuring the CSP

Network Synchronization

Line Card Redundancy

Channel Configuration

Reconfiguration Considerations

Application Requirements

Host Connection Module

Communication Module

Message Management Module

Call Processing Module

Preprogrammed Instructions

Configuration Module

Alarm Manager Module

Real-Time Logging Module

User Interface Module

Host Communication Module

System Maintenance

Host Link Failure Detection

Message Resend Logic

System Busy Warning and System Busy Alarm

Line Card Overload Logic

Line Card Overload Logic Actions

Loopback Diagnostics

5 Layer 4 Call Control

Layer 4 Call Control Overview

Call Control Software Model

Call Control Software Interfaces

Call Control Internal Interfaces

Call Control Call Flows

Modifying a Connection Path Without Parking Channels

Call Control - Multi-Host Control

Call Control Connection Management

Connection Management Messages

Cross Connections

Calling Party Control of Disconnect

Modifying API Messages

Call Control - Tones Generation and Reception

Call Control - Release

Answer Supervision

Call Processing Guidelines

Call Control - Default Call Flows

6 Layer 4 Call Control PPL Information

CH - Channel Management (0x0061)

CM - Call Management (0x0062)

PC - Physical Connection Management (0x0063)

RTR - Router (0x0064)

PPL Component for Interworking (0x0084)

7 Configuring and Using Resources on the DSP Series 2 Cards

Basic DSP Configuration

DSP Configuration API Message Summary

Basic Card Configuration Sequence

Call Processing Messages

Administration API Messages

Configuring Overload Management

Record/Play Files

Recording Files

Full Duplex Channel Recording

Appending or Replacing Recorded Files

Configurable Barge-In for Play Files

Creating a Conference

Creating a Child Conference

Creating a Monitor Conference

Configuring Conferencing Features

Configuring Conferencing Options

Playing Files into a Conference

Digit Collection

Generating Call Progress Tones

Performing Call Progress Analysis

Outpulsing Tones

Customizing Tones

Customizing Call Progress Tone Detection

Example: Customizing a Pattern ID

Configuring Energy Detection

Invoking Energy Detection

Echo Cancellation

Configuring Echo Cancel

Implementing Echo Cancel on a Tandem Call with Positive Voice Detection

Implementing Echo Cancel on a Conference Leg

Media Streaming over RTP

Connecting to an ASR (Automatic Speech Recognition) Server

Connecting to an ASR with Positive Voice Detection

Connecting to a TTS (Text-to-Speech) Server

About Nested TLVs for Media Streaming

Frequency Shift Keying

Caller ID/Calling Name Information (In-band Signaling)

ETSI SMS System Architecture

Short Message Transfer

CTSI SMS System Architecture

Configuring T.30 Fax

Positive Voice Detection/Answering Machine Detection (PVD/AMD)

PVD/AMD Overview

Implementing PVD/AMD

PVD/AMD Examples of Call Processing Events

Examples for Using PVD/AMD

DSP Series 2 to Matrix Controller Series 3 Over Ethernet

8 DSP Series 2 Cards Product Description

DSP Series 2 Card

DSP Series 2 Plus Card

Architecture Overview

DSP Resource Points

Determining your DSP Resource Point Needs

DSP Resource Specifications

Mixing DSP Cards in a CSP

Default DSP Function Type Configuration

Ethernet Link Redundancy

Media Streaming over RTP

File Record And Playback

Encoding Formats

File Retrieval Process

Playback Features

Unified Conference

Monitor Conference

Conferencing Features

Tone Generation

Energy Detection

Supported Features

Fax Applications

Overload Management

Statistics Query

DSP Series 2 and DSP-ONE Cards Compared

DTMF Digit Specifications

MF Digit Specifications

Default Transmit Call Progress Tones

Default Transmit Call Progress Tone Patterns

Default Tone Patterns for CPA Detection

CPA Tone Patterns

Default CPA Tone Pattern Parameters

CPA Pattern Parameter Definitions

CPA Class Parameter Definitions

Pulse Dialing Detector

9 Configuring the DSP-ONE Card

Mixing DSP Cards in a CSP

DSP Function Types

Resources Available per DSP Chip

Configuration the DSP Card

Tone Generation

Call Progress Tone Pattern Transmission

Adjusting Attributes of Call Progress Tones

Address Signaling Tones

Call Progress Tone Pattern Reception

CPA Class Parameters

Customizing Call Progress Tone Patterns for Reception

Configuring a Sample Pattern ID

Energy Detection

Voice Recorded Announcements

VRA Hardware Configuration

Downloading Voice Recorded Announcements

Playing Announcements

Connecting To Voice Recorded Announcements

Recorded Announcement Call Flows

Recorded Announcement Alarms

Single Message Deletion

E1 Dial Pulse Address Signaling

Standard and Mixed Conferences

Monitor Conference

Unified Conferencing

Unified Dynamic Conferencing with DTMF Clamping

10 Configuring Multi-Node Systems

EXNET-ONE Card Software Functions

Distributed Layer 4 Call Processing

EXNET Redundancy

CSP Conferencing

In-Service Upgrades

Expanding the EXNET Ring

Enhanced Ring Fault Tolerance

Failure Processing

Ring Controller State Machine Global States

Fault Detection and Switchover

Passive Addition Process

EXNET Ring Timing

Frequently Asked Questions

11 Call Routing

Introduction to Call Routing

Call Routing Operation

Incoming Call Handling

Call Routing Call Flows

Call Routing Scenarios

Call Routing Configuration

Sample Routing TLV Configurations

Host Notification of Route Derivation

Stage/String Translation

Real-time Updating of Route and Resource Group Tables

Uploading Route and Resource Group Tables

Route Configuration Tool

12 EXNET Connect Card

EXNET Connect Card Overview

Downloading System Software

Configuring the IP Address and Subnet Mask

Configuring EXNET Connect

PCI/H.100 Specific Requirements

H.100 Bus Timeslot Mapping

Full H.100 Mode

CSP Developer’s Guide: Line Cards

1 DS3 Information

Technology Overview

Configuring DS3

Setting up the Software for DS3 Redundancy

SS7 CIC Traffic Over the DS3 Line Card

2 T1 Information

Default Instruction Lists

T1 Component (0x0003)

3 J1 Information

J1 Supported Features

Using the Clear Channel Protocol

JATE Specifications

4 E1 Information

Default Instruction Lists

E1 PPL Component Information (0x0001)

CSP Developer’s Guide: Common Channel Signaling

Cantata Technology Excel Product Line Warranty

1 Common Channel Signaling

2 Introduction to SS7

SS7 Software Architecture

Configuring SS7

SS7 CIC Group Querying

SS7 CIC Traffic Over the DS3 Line Card

Causes of SS7 Signaling Link Problems

TCP/IP with SS7

Configuring TCP/IP with SS7

Configuring SS7 Card Redundancy

SS7 Local Host Initiated Redundancy Switchover

SS7 Fault Conditions & Fault Recovery

SS7 Card Synchronization

SS7 Redundancy: Disabling, Reconfiguring and Querying

SS7 Host Link Failure Detection

SS7 Host Link Failure Detection Architecture

SS7 Host Link Failure Detection and Recovery

SS7 Polling and Host Link Failure

SS7 Signaling Stack Congestion Control

CSP Response to Congestion

Configuring SS7 Virtual Spans

Configuring SS7 10K Virtual Channels

Configuring the SS7 Multi-Protocol I/O

Configuring JT ISUP Variant Stack

Combined Link Set

Dual Ethernet Port for SS7 Series 3 Card

Message Transfer Part (MTP)

MTP3 for Japanese Telecommunications

MTP3-to-Host Functionality

Software Modifications

Configuring MTP3-to-Host

MTP3-to-Host Example

SS7 Raw Data to Host

3 SS7 over the EXNET Ring

SS7 Over the Ring Introduction

SS7 Over the Ring and Single Server Node Communications

SS7 over the EXNET Ring

Configuring SS7 Over the Ring

ISUP Remote Control

Configuring the SS7 Stack

Frequently Asked Questions

4 SS7 Call Control for ISUP

ISUP Introduction

ISUP Incoming Call Setup

ISUP Outgoing Call Setup

CIC Start-up Procedure

ISUP Segmentation

ISUP Continuity Check

ITU ISUP Continuity

ANSI ISUP Continuity

Circuit Status Query

Circuit Validation Test and Response

Call Modification Messages

SS7 CIC Blocking Procedures

SS7 Customization with ISUP Messages

Modifying the Format of an ISUP Message

Important ISUP PPL Information

Overlap Call Digit Collection

Automatic Congestion Control

State Syncing on PPL Event Request for ANM

5 TUP, BT IUP & SSUTR2

Introduction to TUP Call Control

TUP Incoming Call Setup

TUP Outgoing Call Setup

TUP Virtual CIC

TUP Virtual CIC Call Control Management and Maintenance

Configuring Virtual CIC Format

Introduction to BT IUP

Configuring BT IUP on an SS7 Card

BT IUP Call Flows

BT IUP Configuration Examples

BT IUP Signaling Stack Congestion Control

Enabling Congestion Control for BT IUP

Introduction to SSUTR2

Configuring SSUTR2

SSUTR2 Call Flows

Introduction to SCCP/TCAP

SCCP/TCAP Supports Many Services and Applications

Global Title Translation

Message Flow of TCAP Components

SCCP/TCAP Call Flows

Configuring SCCP TCAP

China National Variant Configuration

Global Title Translation (GTT) Configuration Samples

Adjacent Translators Configuration

Example Configurations and TCAP API Messaging

SCCP TCAP Primitives

ITU TCAP Primitives

ANSI TCAP Primitives

ITU and ANSI SCCP Primitives

TCAP Primitive Set Interface

ITU TCAP Primitive Sets

ANSI TCAP Primitive Sets

SCCP/TCAP Parameter Information

SCCP Segmentation

TCAP Overload Logic

Configuring TCAP Overload Logic

7 SS7 PPL Information

L3P CIC (0x000F)

L3P CIC Configuration Bytes (ITU)

L3P CIC Config Bytes with Offset Values (ITU)

L3P CIC PPL Event Indications (ITU)

L3P CIC PPL Event Requests (ITU)

L3P CIC PPL Timers (ITU)

L3P CIC PPL Configuration Bytes (ANSI)

L3P CIC PPL Event Indications (ANSI)

L3P CIC PPL Timers (ANSI)

L3P Link (0x0010)

L3P Link PPL Event Indications

L3P Link PPL Event Requests

ISUP CPC (0x0012)

ISUP CPC Configuration Bytes (ITU)

ISUP CPC PPL Event Indications (ITU)

ISUP CPC PPL Timers (ITU)

ISUP CPC Configuration Bytes (ANSI)

ISUP CPC PPL Event Indications (ANSI)

ISUP CPC PPL Timers (ANSI)

ISUP SPRC (0x0013)

ISUP SPRC Configuration Bytes (ITU)

ISUP SPRC PPL Event Indications (ITU)

ISUP SPRC PPL Timers (ITU)

ISUP SPRC Configuration Bytes (ANSI)

ISUP SPRC PPL Event Indications (ANSI)

ISUP SPRC PPL Timers (ANSI)

ISUP CQS (0x0076)

ISUP CQS Configuration Bytes (ITU)

ISUP CQS PPL Event Indications (ITU)

ISUP CQS PPL Timers (ITU)

ISUP CQS Configuration Bytes (ANSI)

ISUP CQR (0x0077)

ISUP CQR Configuration Bytes (ITU)

ISUP CQR Configuration Bytes (ANSI)

ISUP CQR PPL Event Indications (ITU)

ISUP CQR PPL Event Indications (ANSI)

ISUP CVS (0x0078)

ISUP CVS Configuration Bytes (ANSI)

ISUP CVS PPL Event Indications (ANSI)

ISUP CVS PPL Timers (ANSI)

ISUP CVR (0x0079)

ISUP CVR Configuration Bytes (ANSI)

ISUP CVR PPL Event Indications (ANSI)

ISUP CCO (0x0080)

ISUP CCO Configuration Bytes (ITU/ANSI)

ISUP CCO PPL Timers (ITU/ANSI)

ISUP CRCS (0x0081)

ISUP CRCS Configuration Bytes (ITU)

ISUP CRCS PPL Event Indications (ITU)

ISUP CRCS PPL Timers (ITU)

ISUP DCO (0x0082)

ISUP DCO Configuration Bytes (ANSI)

ISUP DCO PPL Timers (ANSI)

ISUP CRO (0x0083)

ISUP CRO Configuration Bytes (ANSI)

ISUP CRO PPL Event Indications (ANSI)

ISUP CRO PPL Timers (ANSI)

ISUP SSC (0x0085)

ISUP SSC Configuration Bytes (ITU)

ISUP SSC PPL Timers (ITU)

ISUP ACC (0x00A8)

ISUP ACC Configuration Bytes

ISUP PPL Information for Other PPL Components

ISUP PPL Event Indications for Other PPL Components (ITU)

ISUP PPL Event Indications for Other PPL Components (ANSI)

ISUP PPL Timers for Other PPL Components (ITU)

ISUP PPL Timers for Other PPL Components (ANSI)

L3P TUP (0x0011)

L3P TUP Configuration Bytes

L3P TUP PPL Event Indications

L3P TUP PPL Event Requests

L3P TUP PPL Timers

TUP CPC (0x0052)

TUP CPC Configuration Bytes

TUP CPC PPL Event Indications

TUP CPC PPL Timers

TUP SPRC (0x0053)

TUP SPRC Configuration Bytes

TUP SPRC PPL Event Indications

TUP SPRC PPL Timers

TUP BLR (0x0054)

TUP BLR Configuration Bytes

TUP BLR PPL Event Indications

TUP BLR PPL Timers

TUP BLS (0x0055)

TUP BLS Configuration Bytes

TUP BLS PPL Event Indications

TUP BLS PPL Timers

TUP CRI (0x0057)

TUP CRI Configuration Bytes

TUP CRI PPL Event Indications

TUP CRS (0x0058)

TUP CRS Configuration Bytes

TUP CRS PPL Event Indications

TUP CRS PPL Timers

TUP MBUS (0x005B)

TUP MBUS Configuration Bytes

TUP MBUS PPL Event Indications

TUP MBUS PPL Timers

TUP MBUR (0x005C)

TUP MBUR PPL Timers

TUP CGRR (0x0059)

TUP CGRR Configuration Bytes

TUP CGRR PPL Timers

TUP CGRS (0x005A)

TUP CGRS Configuration Bytes

TUP CGRS PPL Event Indication

TUP CGRS PPL Timers

ISUP CGRS (0x001B)

TUP HBUS (0x005D)

TUP HBUS Configuration Bytes

TUP HBUS PPL Event Indications

TUP HBUS PPL Timers

TUP HBUR (0x005E)

TUP HBUR PPL Timers

TUP SBUS (0x005F)

TUP SBUS Configuration Bytes

TUP SBUS PPL Event Indications

TUP SBUS PPL Timers

TUP SBUR (0x0060)

TUP SBUR PPL Timers

L3P SSUTR2 (0x0011)

L3P SSUTR2 Configuration Bytes

L3P SSUTR2 PPL Event Indications

L3P SSUTR2 PPL Event Requests

L3P SSUTR2 PPL Timers

SSUTR2 CPC (0x0052)

SSUTR2 CPC Configuration Bytes

SSUTR2 CPC PPL Event Indications

SSUTR2 CPC PPL Timers

SSUTR2 SPRC (0x0053)

SSUTR2 SPRC Configuration Bytes

SSUTR2 SPRC PPL Event Indications

SSUTR2 SPRC PPL Timers

SSUTR2 BLR (0x0054)

SSUTR2 BLR Configuration Bytes

SSUTR2 BLR PPL Event Indications

SSUTR2 BLR PPL Timers

SSUTR2 BLS (0x0055)

SSUTR2 BLS Configuration Bytes

SSUTR2 BLS PPL Timers

SSUTR2 CRI (0x0057)

SSUTR2 CRI PPL Event Indications

SSUTR2 CRI PPL Timers

SSUTR2 CRS (0x0058)

SSUTR2 CRS Configuration Bytes

SSUTR2 CRS PPL Event Indications

SSUTR2 CRS PPL Timers

SUTR2 CRO (0x007C)

SSUTR2 CRO Configuration Bytes

SSUTR2 CRO PPL Event Indications

SSUTR2 CRO PPL Timers

L3P BT IUP (0x0011)

L3P BT IUP Configuration Bytes

PPL Event Indications

PPL Event Requests

L3P BT IUP PPL Timers

L3 BT IUP CPC (0x0052)

L3 BT IUP CPC Configuration Bytes

L3 BT IUP CPC PPL Event Indications

L3 BT IUP CPC PPL Timers

BT IUP SPRC (0x0053)

BT IUP SPRC Configuration Bytes

BT IUP SPRC PPL Event Indications to Host

BT IUP SPRC PPL Timers

MTP3 HMDT (0x002B)

MTP3 HMDT Configuration Bytes

MTP3 HMDT PPL Event Indications

MTP3 HMDT PPL Event Requests

MTP3 HMRT (0x002C)

MTP3 HMRT Configuration Bytes (ITU/ANSI)

MTP3 HMRT PPL Event Indications

MTP3 HMRT PPL Event Requests (AIB: Stack/Link 0x08)

MTP3 HMRT PPL Timers

MTP3 LSAC (0x002E)

MTP3 LSAC Configuration Bytes

PPL Event Indications Supported by MTP3 LSAC

MTP3 LSAC PPL Timers (ANSI)

MTP3 SLTC (0x0041)

JT MTP3 PPL Configuration Bytes

JT MTP3 PPL Events

JT MTP3 PPL Timers

MTP3 TLAC (0x003C)

MTP3 TLAC PPL Event Indications

ITU MTP3 TLAC PPL Timers

MTP3 TLAC PPL Timers (ANSI)

MTP3 TSFC (0x003F)

MTP3 TSFC PPL Event Indications

ITU/ANSI MTP3 Timers for Various Components

MTP3 PPL Timers (ITU)

MTP3 PPL Timers (ANSI)

MTP2 TXC (0x0026)

MTP2 TXC Configuration Bytes (ITU/ANSI)

MTP2 TXC PPL Timers (ITU/ANSI)

MTP2 SUERM (0x0025)

MTP2 SUERM Configuration Bytes (ITU/ANSI)

MTP2 IAC (0x0022)

PPL Event Indication

MTP2 LSC (0x0023)

PPL Event Indications

Other MTP2 PPL Timers

MTP2 PPL Timers for other components (ITU)

MTP2 PPL Timers for other components (ANSI)

SCCP SCLC (0x0065)

SCCP SCLC Configuration Bytes

SCCP SCLC PPL Event Indications

SCCP SCLC PPL Timers

SCCP SCRC (0x0066)

SCCP SCRC Configuration Bytes

SCCP SUSI (0x0067)

SCCP SUSI Configuration Bytes

SCCP SUSI PPL Event Indications and Requests (ITU/ANSI)

SCCP SSTC (0x006D)

SCCP SSTC PPL Timers

TCAP TUSI (0x0070)

TCAP TUSI Configuration Bytes

TCAP TUSI PPL Event Indications and Requests (ITU)

TCAP TUSI PPL Event Indications and Requests (ANSI)

TCAP CCO (0x0071)

TCAP CCO Configuration Bytes

TCAP ISM (0x0072)

TCAP ISM Configuration Bytes

TCAP ISM PPL Timers

TCAP TCO (0x0073)

TCAP TCO Configuration Bytes

TCAP TSM (0x0074)

TCAP TSM Configuration Byte

TCAP DHA (0x0075)

TCAP DHA PPL Timers

Introduction to ISDN

ISDN Architecture

ISDN Software Features

Configuring ISDN PRI

Network Side Euro-ISDN

Span Configuration

ISDN D Channel Configuration

B Channel Configuration

Configuring the Backup D Channel

Optional Information Elements

Other Optional ISDN Configurations

ISDN Call Processing

ISDN Redundancy

ISDN Congestion Control

ISDN Bearer Connection Independent Supplementary Services

Link Access Protocol D-Channel (LAPD)

LAPD Architecture Overview

LAPD Functional Message Breakdown

LAPD Configuration Sequence

LAPD Inter-Module Configuration and Startup

LAPD and Host Communication

LAPD Example Call Flows

Subrate Switching

Support for ISDN Busy Out Channel with PPL Event Request

ISDN Over Ethernet

9 ISDN PPL Information

Guidelines for Changing ISDN PPL Information

L3P Call Control (0x0005)

L3P Call Control Configuration Bytes

L3P Call Control PPL Timers (0x0005)

L3P Call Control PPL Events

L3P D Channel Control (0x0006)

L3P D Channel Control PPL Events

L3P B Channel Control (0x0007)

L3P B Channel Control Configuration Bytes

L3 Call Reference (0x0008)

L3 Call Reference Configuration Bytes

L3 Call Reference PPL Timers

L3 Call Reference PPL Events

L3 Global Call Reference (0x0009)

L3 Global Call Reference Configuration Bytes

L3 Global Call Reference L3/L5 Events

L3 Global Call Reference PPL Timers

L3 D Channel Control (0x000A)

L3 D Channel Control Configuration Bytes

L3 D Channel Control L3/L5 Events

QSIG/PSS1 PPL Timer

L3 B Channel Control (0x000B)

L3 B Channel Control Configuration Bytes

Event Indications

L4 Call Control Channel Management (0x0061)

L4 Call Control Channel Management QSIG/PSS1 PPL Events

DASS2/DPNSS Features & Internal Architecture

Configuring DASS2/DPNSS Software

11 DASS2/DPNSS PPL Information

DASS2/DPNSS L3P Call Control (0x0D)

L3P Call Control L3P/L5 Events

DASS2/DPNSS L3P Call Control Configuration Bytes

DASS2/DPNSS L3P Events

DASS2/DPNSS Virtual Call Control (0x51)

DASS2/DPNSS Virtual Call Control Configuration Bytes

12 V5.2 Protocol

V5.2 Software Architecture

Configuring V5.2

V5.2 Maintenance and Administration

V5.2 Call Processing

13 V5.2 PPL Information

L3P PSTN Component (0x8B)

L3P PSTN Component PPL Timers (0x008B)

L3P BCC Protocol (0x8C)

L3P BCC Protocol PPL Timers (0x008C)

L3P BCC Link Protocol (0x8D)

L3P Link Protocol PPL Timers (0x008D)

L3P Protection Protocol (0x8E)

L3P Protection Protocol PPL Timers (0x008E)

L3P Control Protocol (0x8F)

L3P Control Protocol PPL Timers (0x008F)

L3P System Management Component (0x90)

L3P System Management Component PPL Timers (0x0090)

L3P PSTN (0x91)

L3P PSTN Configuration Bytes

L3P PSTN PPL Timers

L3P BCC Configuration Bytes

L3P BCC PPL Timers

L3P MGR Configuration Bytes

L3P MGR PPL Timers

QSIG/PSS1 Basic Call Signaling

QSIG/PSS1 Message Segmentation and Reassembly

QSIG/PSS1 Licensing

15 M3UA Implementation in the CSP

Terminology Used

Message Transport Part Level 3 User Adaptation Layer (M3UA)

Important Notes Regarding This Release

M3UA Software Configuration

Overview of Configuration

Standard Configurations

Configuring M3UA Software

Bringing M3UA Objects into Service

Host Notification

Application Server Status Change Notify

Application Server Process Status Change Notify

Connection Status Change Notify

Querying M3UA Data

M3UA General Query

Application Server Query

Application Server Process Query

Signaling Gateway Query

Signaling Gateway Process Query

Connection Query

Route Set Query

Application Server Service State Query

Application Server Process Status Query

Connection Status Query

Application Server Status Query

ISUP Signaling Messages

ISUP Signaling Information

Message Parameters

V5.2 Protocol Implementation Compliance Statement (PICS)

V5.2 Example Configuration Trace

Bringing Logical Span IDs (0-7) and V5 IDs (0-3) In Service

V5.2 Example Call Processing Trace

V5.2 Additional Call Flows

CSP Developer’s Guide: Internet Protocol

Cantata Technology Excel Product Line Warranty

1 Introduction to Converged Services Platform

The Converged Network Framework

VDAC-ONE and IP Network Interface Series 2 Cards

2 VDAC-ONE Card

VDAC-ONE Card Overview

Basic Configuration

IP Resources Attributes

General IP Attributes

Voice Attributes

Jitter Buffer Delay/Adaptation Rate

IP Connection Management

Dynamic Connection Management

Release Mode Configuration

Loopback for Testing

Routing Examples

Sample Route Control / Resource Attribute Configure

VDAC VoIP - 0x009C

3 IP Network Interface Series 2 Card

Similarities Between IP Network Interface Series 2 and VDAC-ONE Cards

Differences Between IP Network Interface Series 2 and VDAC-ONE Cards

Summary of API Messages

Host/IP Network Interface Series 2 Card Integration Information

Startup Sequence/Basic Configuration

TDM and Packet Resource Information

VoIP Resource Profiles

VoIP Resource Profile Terminal Capabilities

IP Resources Attributes

General IP Attributes

Voice Attributes

IP Connection Management

Dynamic Connection Management

Release Mode Configuration

Loopback for Testing

Routing Examples

Sample Route Control / Resource Attribute Configure

PPL Information

Querying the Ethernet Link Status, Duplex Type and Speed

IP Network Series 2 NLP Control Support

4 IP Network Interface Series 3 Card

Comparison of IPN-2 and IPN-3 Cards

IP Network Interface Series 3 Voice Coder Packet Rate Information

Software Requirements

Obtaining Additional Software Fault Log Information

5 Session-Initiation Protocol (SIP) Software

SIP Protocol Overview

CSP SIP Overview

SIP Call Overview

Configuration Messages

Possible Modifications to Existing Applications

PPL Information: SIP UA 0x00A7

Call Flow Messages

Routing with Route Control or Outseize Control messages

Tandem SIP-to-SIP Call Flow Example

Common SIP Functions and Call Features

Registration Overview

Host Controlled SIP Registration Failure Response Code

SIP Registration Duration Check

Dual Ethernet Port

SIP User Agent Redundancy

SIP Support for TCP

Reporting/Generating SIP Headers or Parameters

Host Notification of Selective SIP Header Information

Via Heading Reporting

Call-ID Reporting for Outbound SIP Calls

Subject Header Field Access

SIP Display Name Parameter in From Header

Access To Contact Header

SIP Access To Parameters in To Header

Report and Control of P-Asserted and P-Access Network Info Headers

SIP Remote Party ID and RPID Privacy for Outbound Calls

Remote Party ID

Reporting/Generating SIP Responses

Call Progress Notification to Host with PPL Event Indication

SIP 182 Queued Message

SIP/VoIP Media Parameters Synchronization

SIP Signaling Support for T.38 Fax Media Sessions (for Non-Call Agent Mode)

Core SIP Functionality

Host Control Method of SIP 180 Provisional Response Generation

RFC 2833 (DTMF Digits) Dynamic Payload Negotiation

RE-INVITE Message

Codec List in SIP-Initiated Offer

Send and Receive SIP Signals Using the Same Port

SIP Notifications of Options

Disabling the SIP Domain Name System (DNS) Server

Advanced SIP Functionality

REFER and NOTIFY Methods

SIP Referred By Mechanism

Host Generated Refer Message

Refer-To Header Parameter Access

SIP Subject Header in REFER

Report REFER Request URI in PPL Event Indication

Refer to Phone Number

SIP Population of Status in Outbound NOTIFY Message

SUBSCRIBE and NOTIFY Method for DTMF Detection

SIP Notify Subscription State

Programmable SIP URI Extensions

Support for Request URI Parameters in SIP INVITE Messages

Support for SIP INFO Message

SIP Support for MIME

Outbound SIP Call with Call Agent Mode

NPDI Data Model

Virtual IP Channels

Deploying Call Agent

Sample Configuration File for Call Agent

Call Agent Reconnect

Outbound SIP Call with Call Agent

Session Description Protocol (SDP) Pass-Through for Call Agent Mode

Support REFER Request in Call Agent

PPL Event Request for RE-INVITE Message

Introduction to Interworking

Configuring Interworking

SIP-UPDF Tunneling

Tunneling UPDF TLVs

8 Routing VoIP Calls

Channel Management PPL Component for VDAC - 0x0061

Routing SIP and H.323 Calls Using Route Control Message

Routing SIP and H.323 Calls Using Outseize Control Message

Routing Clear Channel VoIP Calls

IP Based Routing

9 H.323 Software

H.323 Protocol Overview

CSP H.323 Offering

Hardware Requirements

Other Prerequisites

Software Overview

Internal Architecture

Possible Modifications to Existing Applications

PPL Component for RAS - 0x00A0

PPL Component for H.225 - 0x00A1

PPL Component for L3P H.245 - 0x00A2

A H.323 Support and Compliance

B SIP Support and Compliance

C H.323 Call Flows and Message Traces

Call Release Call Flows

CSP API Reference

Cantata Technology Excel Product Line Warranty

Numerical List of EXS API Messages

EXS API Message Set

SwitchKit Message Set

1 EXS & SwitchKit API Messages

Introduction to API Messages

AdjustMessageTimeout

Alarm Cleared 0x00C1

AllocateChannel

AllocateChannelGroup

AllOutOfService

Answer Supervision Mode Configure 0x00BB

AppConnectionQuery

AppDescriptionData

AppPopulationQuery

ARP Cache Query 0x00FC

ARP Cache Report 0x00FB

Assign EXS Host/Slave 0x006E

Assign Logical Node ID 0x0010

Assign Logical Span ID 0x00A8

Associate Chan Group

B Channel Configure 0x00C8

B Channel Query 0x00CA

Become Active 0x00A1

Busy Out 0x0018

Busy Out Flag Configure 0x00D3

Call Control Instructions Query 0x0087

Call Processing Event 0x002E

Call Progress Analysis Class Configure 0x00B3

Call Progress Analysis Configuration Query 0x008A

Call Progress Analysis Pattern Configure 0x00B2

Call Progress Analysis Result 0x0034

CancelUserTimer

Card Population Query 0x0007

Card Status Query 0x0083

Card Status Report 0x00A6

CCS Redundancy Configure 0x005B

CCS Redundancy Query 0x006C

CCS Redundancy Report 0x0073

Channel Connection Status Query 0x0001

Channel Parameter Query 0x0080

Channel Release Request 0x0037

Channel Released 0x0049

Channel Released With Data 0x0069

ChannelGroupContentsQuery

ChannelGroupPopulationQuery

Clear System Software 0x000C

ClearAllChanGroups

Clear IP Signaling Series 3 Card 0x0108

Collect Digit String 0x00BC

ConfigChanGroup

ConfigStatusMsg

Conference Create 0x004B

Conference Delete Request 0x004C

Conference Deleted 0x004D

Connect One-Way To Conference 0x004F

Connect To Conference 0x004E

Connect One-Way Forced 0x0050

Connect Tone Pattern 0x002F

Connect Wait 0x0017

Connect With Data 0x0005

Connect With Pad 0x0003

ConnectionStatusMsg

CPC Detection 0x0047

CreateConnection

Cross Connect Channel 0x001A

Cross Connect Span 0x001C

Cross Disconnect Channel 0x001B

Cross Disconnect Span 0x001D

CSAPPLTimerConfig

D Channel Assign 0x00C4

D Channel De-assign 0x00C5

D Channel Facility List Configure 0x00C6

D Channel Facility List Query 0x00CB

Diagnostics Indication 0x0045

Disconnect Tone Pattern 0x001E

Distant End Release Mode 0x00B8

Download Begin BRecord 0x009B

Download Begin SRecord 0x00A2

Download BRecord 0x009C

Download Complete 0x00A4

Download SRecord 0x00A3

DS0 Status Change 0x0042

DS3 Configure/Query 0x000F

DSP Cache Modify 0x011A

DSP Service Cancel 0x00BE

DSP Service Request 0x00BD

DSP SIMM Configure 0x00C0

E1 Span Configure 0x00D8

E1 Span Query 0x00DB

EXNET Ring Configure 0x0074

EXS Node Configure 0x007F

EXS Node Configuration Query 0x007E

Fault Log Query 0x0086

Filter/Timer Configure 0x0012

Flash Timing Configure 0x0016

ForceGroupState

Generate Call Processing Event 0x00BA

Generic Card Configure 0x0122

Generic Card Query 0x0123

Generic Event Logger Configure/Query 0x003D

Generic Report 0x0046

GenericLLCReport

IgnoreChanGroup

Inpulsing Parameters Configure 0x0028

Inpulsing Parameters Query 0x0089

Inseize Control 0x002B

Inseize Instruction List Configure 0x0029

IP Address Configure 0x00E7

IP Address Query 0x00E6

IP Signaling Series 3 Card Configure 0x0100

IP Signaling Series 3 Card Host Poll 0x0104

IP Signaling Series 3 Card Query 0x0101

IP Signaling Series 3 Card Status Report 0x0105

IP Socket Configure 0x00F0

IP Socket Query 0x00F1

IP Socket Status Report 0x00F2

ISDN Interface Configure 0x0060

ISDN Query 0x0063

ISDN Terminal Configure 0x0062

J1 Span Configure 0x0019

Line Card Switchover 0x0024

Local End Release Mode Configure 0x0021

Loop Back Configure/Query 0x0091

Loop Timing Configure 0x004A

Matrix Configure 0x007D

Matrix Query 0x0097

Matrix Status Report 0x00E5

Multi-Host Configure 0x00E9

NGA Configure 0x0130

NGA Configure Query 0x0131

NGA Service Configure 0x0160

NGA Service Query 0x0161

NGA State Query 0x0162

NGA State Notify 0x0163

Node Status Query 0x006F

Node Status Report 0x0070

Outpulse Digits 0x0020

Outseize Control 0x002C

Outseize Instruction List Configure 0x002A

PCM Encoding Format Configure 0x00D9

Park Channel 0x00BF

Play File Modify 0x011C

Play File Start 0x011B

Play File Stop 0x011D

Poll Interval Configure 0x009F

Poll Request 0x009E

PPL Assign 0x00D1

PPL Audit Configure 0x00DC

PPL Audit Query 0x00DD

PPL Configure 0x00D7

PPL Create 0x00D4

PPL Data Query 0x00DE

PPL Delete 0x00DA

PPL Event Indication 0x0043

PPL Event Request 0x0044

PPL Table Download 0x00D6

PPL Protocol Query 0x00DF

PPL Table Download Initiate 0x00D5

PPL Timer Configure 0x00CF

PPL Transmit Signal Configure 0x00D2

Product License Download 0x0079

Product License Query 0x007A

Recorded Announcement File System Report 0x0119

Recorded Announcement File System Convert 0x0118

Recorded Announcement Single Delete 0x0117

Recorded Announcement File System Defragment 0x0103

Recorded Announcement File System Query 0x0102

Recorded Announcement Report 0x0058

Recorded Announcement Query 0x0057

Recorded Announcement Connect 0x0055

Recorded Announcement Disconnect 0x0056

Recorded Announcement Delete 0x0054

Recorded Announcement Download 0x0053

Recorded Announcement Download Initiate 0x0052

Receive Signaling Configure 0x0015

Record File Modify 0x011F

Record File Start 0x011E

Record File Stop 0x0120

RedundantAppPoolsQuery

Redundant App Pool Members Query

RedundantAppQuery

RedundantAppStatusMsg

Redundant LLC Register

RegisterAsRedundantApp

Register Virtual Name

Release Channel 0x0008

Release Channel With Data 0x0036

ReleaseCacheChannels

Remove Channels From Group

RemoveLLCRoutingID

RequestChannelAck

RequestChannelMsg

Request For Service 0x0040

Request For Service With Data 0x002D

RequestStandbyPoll

Reselect Primary App

Reset Configuration 0x000B

Reset IP Signaling Series 3 Card 0x0107

Reset Matrix 0x009D

Reset Standby Matrix

Resource Attribute Configure 0x00E3

Resource Attribute Query 0x00E4

Resource Connect 0x0127

Resource Create 0x0124

Resource Delete 0x0126

Resource Delete Indication 0x0129

Resource Disconnect 0x0128

Resource Information Notify 0x0141

Resource Modify 0x0125

Resource Query 0x012C

Resource Release Indication 0x012E

Resource Release Request 0x012D

Ring Status Query 0x0071

Ring Status Report 0x0072

Route Control 0x00E8

ServerStatusChange

Service State Configure 0x000A

SNMP Configure 0x0092

Span Filter Configure 0x00CD

Span Filter Query 0x00CE

Span Status Query 0x0084

SS7 CIC Configure 0x006A

SS7 CIC Query 0x0067

SS7 CLLI Configure 0x00EA

SS7 CLLI Query 0x00EB

SS7 ISUP Message Format Configure 0x006B

SS7 ISUP Message Query 0x0068

SS7 SCCP/TCAP Configure 0x0077

SS7 SCCP/TCAP Query 0x0078

SS7 Signaling Link Configure 0x005E

SS7 Signaling Link Query 0x0065

SS7 Signaling Link Set Configure 0x005D

SS7 Signaling Link Set Query 0x0064

SS7 Signaling Route Configure 0x005F

SS7 Signaling Route Query 0x0066

SS7 Signaling Stack Configure 0x005C

SS7 Signaling Stack Query 0x006D

SS7 TUP Message Format Configure 0x008F

SS7 TUP Message Query 0x0090

Standby Line Card Configure 0x0023

Start Dial Configure 0x0013

Statistics Query 0x0121

Subrate Connection Management 0x000D

SwitchBackFromStandby

Synchronization Priority List Configure 0x0006

Synchronization Priority List Query 0x0081

System Configuration 0x00AF

System Configuration Query 0x00B4

System Log Query 0x0082

System Resource Usage Query 0x008E

T1 Span Configure 0x00A9

T1 Span Query 0x0085

Tag Configuration 0x00D0

TCAPMessageRegister

TFTP Manage 0x003A

Time Set 0x00B5

Tone Configure 0x0031

Tone Query 0x005A

TransferChanMsg

Transmit Cadence Pattern Configure 0x0030

Transmit Cadence Pattern Query 0x0059

Transmit Signaling Configure 0x0014

Trunk Type Configure 0x0011

UpgradeSoftwarePatch

V5 Configuration Query 0x007C

V5 Configure 0x007B

Version Request 0x0002

Virtual Card Configure 0x00E0

Virtual Span Control 0x00E2

VoIP Protocol Configure 0x00EE

VoIP Protocol Query 0x00EF

2 Address Elements

Introduction to Address Elements and Address Information Blocks

Address Elements

0x00 00 00 00 Null

0x06 ISDN Call Reference

0x0C Logical Span

0x0E EXS Host-Slave Node

0x10 Logical/Physical Node

0x11 Logical/Physical Span

0x13 Physical Span

0x14 SS7 CIC Group

0x15 ISDN Primary D Channel

0x16 ISDN Secondary D Channel

0x1A EXNET Ring

0x1C SS7 Destination ID

0x1E SS7 Link Set

0x1F SS7 Link Set/Link

0x20 SS7 Destination/Route

0x23 Slot/Subrate

0x25 Subrate Channel

0x27 ISDN BRI TEI

0x2A SS7 Subsystem Number

0x2D V5 ID, Link ID

0x2F V5 ID, User Port

0x30 V5 ID, User Port, Link, Timeslot

0x31 SS7 Virtual CIC

0x32 DS3 Offset

0x3A D Channel Data Link Connection Identifier

0x3C Number of CICS

0x3D Ring Configuration Query

0x42 VoIP Module

0x45 Child Conference ID

0x48 Ring Communication Link

0x52 IP Signaling Series 3 Card ID or Expanded Logical Node ID

0x53 Object Type

0x55 Conference ID

0x64 Global Object Type

0x65 Global Object ID

0x67 Functional Area

0x73 IP Signaling Series 3 Card ID

0x7F SIP Stack ID

3 Information Control Blocks

Introduction to ICBs

0x01 Free System Resources

0x01 Scan For Wink N

0x01 Report Call Processing Event

0x02 Release Mode Configure

0x02 Generate Call Processing Event

0x03 Receive Stage N Address Data

0x04 Report Call Processing Event

0x05 Outpulse Stage N Address Data

0x07 Query Load Version

0x08 Send Host Acknowledgment

0x08 Query Load Filename

0x09 Do Call Progress Analysis

0x09 Use Instruction List

0x0A Delay N Milliseconds

0x0B Use Instruction List

0x10 Do Call Progress Analysis Without Line Signaling

0x11 Delay N Milliseconds

0x35 Query Host Message Registration

0x36 Query Host Connections

0x37 Query Multi-Host Status

0x38 Query Hard-registered PPL Components

0x39 Query Soft-registered PPL Components

0x01 Stage N Address Data

0x02 Stage N Address Data

0x10 ISDN Formatted IEs

0x11 ISDN Raw IEs

0x12 SS7 Parameters

0x14 PPL Argument 2 Data

0x15 DASS2/DPNSS Raw Data

0x16 SS7 Protocol Violation Data

0x17 ISDN Formatted IEs With Event

0x18 ISDN Raw IEs with Event

0x1C SS7 TUP Formatted Fields

0x1E Generic PPL

0x1F SS7 Unformatted Raw Parameters

0x20 SS7 SCCP Parameters

0x21 SS7 TCAP Parameters

0x22 Raw SS7 Data Parameters

0x23 BT IUP Parameters

0x24 Product License

0x25 ISDN Segmented Message

0x37 Local Matrix Controller Configuration Filename

0x38 Local Matrix Server IP Address

0x39 Adjacent Matrix Controller Configuration Filename

0x3A Adjacent Matrix Server IP Address

0x3C Save Options

0x3D Load Version

0x3E Load Filename

0x47 Enable Switch-Initiated Messages

0x48 Disable Switch-Initiated Messages

0x49 Enable PPL Event Indication Messages

0x4A Disable PPL Event Indication Messages

0x4B Deregister Switch-Initiated Messages

0x4C Deregister PPL Components

0x50 Hard Register All Switch-Initiated Messages

0x51 Soft Register All Switch-Initiated Messages

0x52 Deregister All Switch-Initiated Messages

0x53 Hard Register All PPL Component IDs

0x54 Soft Register All PPL Component IDs

0x55 Deregister All PPL Component IDs

0x5B IP Signaling Series 3 Card ID

0x5D H.323 DTMF Signal Input Received

0x5E H.323 Signal Update Input Received

0x5F H.323 Alphanumeric Input Received

0x62 Remote Endpoints UII Capabilities

0x65 TCAP Primitive

0x66 SS7 Address Information

0xFF PPL General Purpose Register Data

Extended Data ICBs

0x0012 SS7 Formatted Parameters

0x001E Generic PPL

0x0020 SS7 SCCP Parameters

0x0021 SS7 TCAP Parameters

0x0028 V5 Subscriber ID

0x0029 V5 Formatted IEs

0x002B MTP3 User Part Parameter

0x002C V5 User Port Range

0x002D Q.752 Parameter

0x002F V5 Statistics Query

0x0030 V5 Statistics Data

0x0031 V5 Status Indication

0x0033 NPDI Universal ICB

0x0034 LAPD Frame

0x0035 LAPD Status

0x0065 TCAP Primitive

SS7 and ISDN Values

SS7 Parameter IDs

MTP Parameter IDs from Q.752

Information Elements

0x01 Call Reference

0x02 Called Party Number

0x03 Calling Party Number

0x04 Called Party Subaddress

0x05 Calling Party Subaddress

0x06 Redirecting Number

0x08 Progress Indicator

0x09 User-to-User

0x12 Vari-A-Bill

0x13 Directory Number (DN) Provisioning

V5 Information Elements

0x01 Pulse Notification

0x02 Line Information

0x04 Autonomous Signaling Sequence

0x05 Sequence Response

0x07 Cadence Ringing

0x08 Pulsed Signal

0x09 Steady Signal

0x0A Digit Signal

0x0B Recognition Time

0x0C Pulsed Signal

0x0D Disable Autonomous Acknowledge

Parameter Type Values for Cadence Ringing Extended IE

0x10 Cadence Ringing Extended (Type A - Digits and Characters Present)

0x10 Cadence Ringing Extended (Type B - Digits Present, Characters Missing )

0x10 Cadence Ringing Extended (Type C - Digits Missing, Characters Present)

0x10 Cadence Ringing Extended (Type D - Digits and Characters Missing)

0x12 Called Party

0x15 User Port ID IE

0x17 V5 Timeslot ID IE

0x1B V5 Timeslot ID IE

Coding Standard

Number Plan Identification

Presentation Indicator

Progress Indicator

Reason For Redirection

Screening Indicator

DASS2/DPNSS Values

Information Elements

0x01 Service Indicator Code (SIC)

0x02 Selection Data

0x03 Indication Data

4 Tag Length Value Blocks

Introduction to TLVs

0x01 Trunk Number

0x01 Module, IP Address, and Subnet Mask

0x01 Add Virtual Card

0x01 Client Socket Register by IP

0x02 Remove Virtual Card

0x02 Server Socket Register by IP

0x02 Local CLLI

0x03 Client Socket Register by Name

0x03 Remote CLLI

0x04 Trunk Type

0x04 Server Socket Register by Name

0x04 Reset Indicator

0x05 Gateway IP

0x05 Unregister Socket

0x06 Open Socket

0x07 Close Socket

0x08 Prohibit Traffic on Socket

0x09 Allow Traffic on Socket

0x09 Ethernet Link Redundancy

0x09 Ethernet Link Redundancy (DSP Series 2 Card)

0x0A Activate Ethernet Port

0x0A Activate Ethernet Port (DSP Series 2 Card)

0x0A Socket Status

0x0C Socket Information

0x11 Signaling Route Test Control Status

0x12 Signaling Route Test Control DPC

0x14 Reset VDAC Module

0x6F L3 IP Protocol Type

0x0001 Add IP Signaling Series 3 Card

0x0001 Create V5 ID

0x0002 Destroy V5 ID

0x0002 Remove IP Signaling Series 3 Card

0x0003 Matrix ID

0x0003 Protocol Type

0x0003 V5 Variant ID

0x0004 V5 Variant Type

0x0004 Remove Matrix

0x0004 Configuration Tag

0x0005 IP Signaling Series 3 Card IP Address

0x0005 IP Signaling Series 3 Card Slot Number

0x0006 Route Group ID

0x0006 Add V5 User Port Range

0x0007 Remove V5 User Port Range

0x0007 IP Signaling Series 3 Card Service State

0x0007 Incoming Span/Channel, Single Address

0x0007 Incoming Span/Channel, Range Address

0x0008 IP Signaling Series 3 Card Compatibility Tag

0x0008 Criteria Type

0x0009 Address Element TLV

0x0009 Poll Interval

0x0009 Terminating Channel

0x0009 Terminating Span/Channel, Single Address

0x0009 Terminating Span/Channel, Range Address

0x000A Matrix IP Address

0x000A Add Poll Interval

0x000A V5 C Channel Assignment

0x000B V5 Cpath Assignment

0x000B IP Signaling Series 3 Card Version

0x000C Matrix IP Address

0x000C V5 Add Link

0x000D V5 Remove Link

0x000E Terminating Span/Channel Offset

0x000E IP Signaling Series 3 Card Interface Service State

0x000F IP Signaling Series 3 Card Interface Support

0x000F Router Protocol ID

0x000F V5 Remove C Channel Assignment

0x000F Link Down Timer

0x0010 Incoming Resource Group

0x0010 V5 Interface ID

0x0010 Incoming Res Group ID, Single Address

0x0010 Incoming Res Group ID, Range Address

0x0012 Remove V5 Cpath Assignment

0x0013 Routing Method

0x0014 Message Header Information

0x0015 Terminating Resource Group

0x0015 Terminating Resource Group ID, Single Address

0x0015 Terminating Resource Group ID, Range Address

0x001A Incoming Node

0x001D Special Routing Instruction

0x0020 IP Signaling Series 3 Card Interface Status

0x0021 IP Signaling Series 3 Card Host Poll

0x0051 Dialog Terminated

0x005E Resource Client ID

0x0061 Reject Reason

0x0062 Resource Group Reorder Method

0x0063 Route Number

0x0065 Physical VoIP Channel

0x006D SCCP Return Reason

0x0071 Virtual VoIP Channel

0x0076 SCCP Other Return Reason

0x0080 IP Signaling Series 3 Card Status

0x0100 RTP Payload Type (VDAC-ONE)

0x0100 RTP Payload Type (IPN Series 2)

0x0100 RTP Payload Type (IPN Series 3)

0x0101 RTP Payload Size (VDAC-ONE)

0x0101 RTP Payload Size (IPN Series 2)

0x0101 RTP Payload Size (IPN Series 3)

0x0102 RTP Silence Suppression

0x0103 RTP Echo Cancellation

0x0104 RTP Packets Lost

0x0105 RTP Packets Received

0x0110 RTP Octets Received

0x0111 RTP Packets Sent

0x0112 RTP Octets Sent

0x0115 Call Agent Mode

0x0116 Channel Service TLV

0x0117 Alerting Propagation Mode

0x0118 Companding Conversion Mode

0x0119 Media Offer Stage

0x011A Call Agent Mode Physical Channel ID

0x011B Reliable Provisional Response Mode

0x011C SIP Stack T.38 Fax Support

0x0141 Modify Connection

0x0168 VDAC Module IP Address

0x01AE Poll Interval Configure

0x01C2 Minimum Jitter Buffer Delay

0x01C3 Maximum Jitter Buffer Delay (IPN-2 Card)

0x01C3 Maximum Jitter Buffer Delay (IPN-2 Card)

0x01C3 Maximum Jitter Buffer Delay (IPN-3 Card)

0x01C4 Adaptation Rate

0x01C5 Fax Type Enable

0x01C6 Modem Enable Transport Method

0x01C7 Fax/Modem Bypass Coder Type

0x01C8 Protocol Type

0x01C9 Primary Matrix IP Port

0x01CA Secondary Matrix IP Port

0x01D0 Gateway Mode

0x01D1 RTP Payload Redundancy

0x01D2 Fax Payload Redundancy

0x01D4 Type of Service

0x01D6 DNS IP Address

0x01D7 Default Domain Name

0x01DB Connection Mode

0x01DC VoIP Module

0x01DD Flush ARP Cache Table Entry

0x01DE ARP Cache Table Entry

0x01DF UDP Source Port Validate

0x01E0 ARP Cache Report Information

0x01E1 Fax Compatibility Mode

0x01E2 RFC 2833 Enable

0x01E5 VoIP Resource Profile Assign

0x01E6 Source T.38 Port

0x01E7 Destination T.38 Port

0x01E8 Source RTCP Port

0x01E9 Destination RTCP Port

0x01EA VoIP Terminal Capabilities

0x01EB RTP Timer Timeout (VDAC-ONE)

0x01EB Initial Media Inactivity Timeout (IP Network Interface Series 2 Card)

0x01EC Media Inactivity Detection Timer

0x01ED RFC 2833 Jitter Buffer Size

0x01EE Invalid Packet Alarm Threshold

0x01EF Initial UDP Port Number

0x01F0 Number of UDP Ports

0x01F1 RFC 2833 Dynamic Payload Type

0x01F2 RFC 2198 Dynamic Payload Type

0x0262 Use SIP Local Port

0x0263 Use SIP Remote Port/Default Proxy Port

0x0264 Use SIP Remote Host/Default Proxy Host

0x0265 Use SIP Site ID

0x0266 Use SIP Anonymous Caller

0x0267 Use SIP Invite T1 Timer

0x0268 Use SIP BYE T1 Timer

0x0269 Use SIP T2 Timer

0x026A Use SIP Maximum Retransmissions Invite

0x026B Use SIP Max Retransmissions BYE

0x0270 SIP Tunnel Type

0x0272 Use SIP Registration Timeout

0x0274 Use No Local Media

0x0275 Local Registration Enable/Disable

0x0277 SIP Version

0x0279 SIP Local Route Lookup

0x027A SIP Registration Mode

0x027B Session Interval

0x027C Min-SE Interval

0x027D SIP Transport Type

0x027F SIP Message Information Mask

0x027E SIP Persistent Sockets

0x0280 SIP Existing Socket Reuse

0x0281 SIP Idle Socket Timeout

0x0282 PPL Event Notification Mask

0x0283 Minimum Registration Duration

0x0284 Resynchronize VoIP Media Parameter

0x02BC Gatekeeper IP and Port

0x02BE Variant ID

0x02BF Version Number

0x02C0 Terminal Type

0x02C1 Vendor ID

0x02C2 Gatekeeper Auto Discovery

0x02C3 Gatekeeper Auto Registration

0x02C4 Gateway E164

0x02C6 Gateway URL ID

0x02C7 Gateway E-mail ID

0x02C8 H.225 T301 Timer

0x02C9 H.225 T303 Timer

0x02CA H.225 T310 Timer

0x02CB H.245 T101 Timer

0x02CC H.245 T103 Timer

0x02CD H.245 T105 Timer

0x02CE H.245 T106 Timer

0x02CF H.245 T108 Timer

0x02D0 H.245 T109 Timer

0x02D1 RAS GRQ Timer

0x02D2 RAS RRQ Timer

0x02D3 Gateway Technology Prefix

0x02D4 H.323 Message Information Mask

0x02D5 H.245 Tunneling Configure

0x05DC File Management Configuration

0x05DD Server Address

0x05DF Vocabulary Index File

0x05E1 File Format

0x05E2 File Location

0x05E5 Barge In

0x05E6 File Event Descriptor

0x05E7 Playback Repeat

0x05E8 Beep Tone Parameters

0x05E9 Initial Silence Timer

0x05EA Final Silence Timer

0x05EB Maximum Record Timer

0x05EC Skip Steps

0x05ED Dual Channel Record Option

0x05EF Alarm Threshold Configure

0x05F0 DSP 2 Main Board Memory Alarm Threshold Configure

0x05F1 DSP Temporary Memory Alarm Threshold Configure

0x05F2 Play File Queue

0x05F3 Vocabulary Index Read Information

0x05F4 Statistics Update Timer

0x05F5 Fixed Memory Statistics

0x05F6 DSP Series 2 Cache Statistics

0x05F7 DSP Function Statistics

0x05F8 NFS Statistics

0x05F9 Query Statistics

0x05FA Card Object

0x05FB Silence Threshold

0x05FC Temporary Record File Timer

0x05FD CPU Statistics

0x05FE Resource Point Statistics

0x05FF DSP Cache Modify Action

0x0600 NFS User Group ID

0x0601 NFS Poll Retries

0x0602 Resource Type

0x0603 Channel/DSP Pool

0x0604 DTMF Clamping/Filtering Enable

0x0605 EXS Conferencing Encoding Type

0x0606 Monitor Conference Enable

0x0607 Output Gain Control

0x0608 Noise Gating Enable

0x0609 Noise Gate Parameters

0x060A Echo Suppression Enable

0x060B Echo Suppression Parameters

0x060C Automatic Gain Control Enable

0x060D Automatic Gain Control Input Level

0x060E Automatic Gain Control Parameters

0x060F Conference Failure Behavior

0x0610 Conference ID

0x0611 Forced Flag

0x0612 Connection Type

0x0613 Conference Size

0x0614 Offset and Length

0x0615 Append or Replace

0x0616 DSP Series 2 Overload Statistics

0x0617 Alarm Threshold Query

0x0618 Alarm Threshold Enabled Report

0x0619 PVD Parameters

0x0620 AMD Parameters

0x061B AMD Reports

0x061C Server State

0x0640 Matrix/Host Sequence Number Size

0x0641 Header Parameter Format

0x0642 T.30 Control Parameter Max Value

0x0643 T.30 Control Parameter Transmit Level

0x0644 T.30 Control Parameter ECM Enabled

0x0645 T.30 Control Parameter Local Session ID

0x0647 Receive Modem Type

0x0648 Receive Resolution Type

0x0649 Receive Encoding Type

0x064B Receive Bad Line

0x064C Receive Page Size

0x0651 Receive Enable ECM

0x0652 Receive Add Header

0x0654 Receive Line Error Threshold

0x0655 Receive Timeout

0x0657 Receive Terminal ID

0x065A Transmit Modem Type

0x065B Transmit Resolution Type

0x065C Transmit Page Size

0x0661 Transmit Enable ECM

0x0662 Transmit Add Header

0x0664 Transmit Enable CNG

0x0666 Transmit Timeout

0x0668 Transmit dbm Level

0x066A Transmit Terminal ID

0x066C Fax Processing Events Set Register

0x066D Fax Configuration Query Type

0x0673 Echo Cancel Tap Length

0x0674 Echo Cancel NLP Type

0x0675 Echo Cancel ADAPT

0x0676 Echo Cancel Bypass

0x0677 Echo Cancel G.176 Modem Answer Detection

0x0678 Echo Cancel NLP Threshold

0x0679 Echo Cancel CNG Noise Threshold

0x067A Echo Cancel H Register Reset

0x067E Echo Cancel Comfort Noise Level

0x0687 - Enable RTP for Play/Record File

0x0688 - RTP Record Mode

0x0689 - Start/Stop Sending RTP Packets

0x068A - Calender Time Offset for Sending RTP Packets

0x068B Input Gain Control

0x068C FAX Page Range

0x068D Transit Connection Mode

0x0690 Frequency Shift Keying (FSK) Data

0x0691 Terminal Equipment Alerting Signal (TAS)

0x0692 Subscriber Alerting Signal (SAS)

0x0693 FSK Data Transmission Type

0x0694 Short Message Service (SMS) Data

0x0695 FSK Modem Type

0x0750 Dial Pulse Detection Parameters

0x0751 - Play Continue On Digit Detection

0x09CA Add Global Title Group

0x09CB Delete Global Title Group

0x09CC Add Global Title Entry

0x09CD Delete Global Title Entry

0x09CE Build Index Table

0x09CF Global Title Group Query

0x09D0 Global Title Entry Query

0x09D1 Global Title Group Query Response

0x09D2 Global Title Entry Query Response

0x2710 Universal Protocol Data, Single

0x2710 Universal Protocol Data, Range

0x2712 Congestion Level (Interworking Only)

0x2716 Call Identity (Interworking Only)

0x2717 Called Party Number

0x2718 Calling Party Number (Connected Number)

0x271A Circuit State (Interworking Only)

0x271B Cause Indicators (Interworking Only)

0x2725 Forward Call Indicators (Interworking Only)

0x2727 Generic Digit Information (Interworking Only)

0x2729 Generic Number (Interworking Only)

0x272A Generic Reference Number (Interworking Only)

0x272B Hop Counter (Interworking Only)

0x2737 Original Called Number (Interworking Only)

0x273C Redirecting Number (Interworking Only)

0x273D Redirection Information (Interworking Only)

0x273E Redirection Number (Interworking Only

0x2745 Transit Network Selection (Interworking Only)

0x2749 Bearer Capability (Interworking Only)

0x274E NPDI Message Type

0x274F Progress Indicator (Interworking Only)

0x2750 Display (Interworking Only)

0x2751 High Layer Compatibility (Interworking Only)

0x2752 Low Layer Compatibility (Interworking Only)

0x2753 Calling Party Sub Address (Interworking Only)

0x2754 Called Party Sub Address (Interworking Only)

0x2755 Low Layer Compatibility Layer 1 Info (Interworking Only)

0x2756 Low Layer Compatibility Layer 2 Information (Interworking Only)

0x2757 Low Layer Compatibility Layer 3 Information

0x2758 Pulse Notification (Interworking Only)

0x2759 Call State (Interworking Only)

0x275A Generic Command (Interworking Only)

0x275B Generic Command Response (Interworking Only)

0x275C Signal (Interworking Only)

0x275D Pulsed-Signal (Interworking Only)

0x275E Steady Signal (Interworking Only)

0x275F Recognition Time (Interworking Only)

0x2760 Line Information (Interworking Only)

0x2761 Channel Identification

0x2762 Date and Time (Interworking Only)

0x2763 Carrier Information (Interworking Only)

0x277D Universal Message Envelope (Interworking Only)

0x277E Remote Side Protocol

0x277F - 0x2783 Display (Interworking Only)

0x2784 Charge Number (Interworking Only)

0x278C Connected Number Subaddress (Interworking Only)

0x278F Originating Line Information (Interworking Only)

0x2792 Source IP Address

0x2793 Source RTP Port

0x2794 Destination IP Address

0x2795 Destination RTP Port

0x27AF NPDI SIP Fax Mode

0x27B0 RTP Payload Type

0x27B1 RTP Payload Size

0x27B2 NPDI RTP Silence Suppression

0x27B3 NPDI RTP Connection Mode

0x27B4 IP Address Criteria

0x27C1 IP Signaling Series 3 Card ID

0x27C2 Remote End Signaling IP Address (Q.931)

0x27C3 Remote End Signaling Port (Q.931)

0x27C4 Source IP

0x27C5 Source Port

0x27C9 Charge Area Information Parameter

0x27CA Carrier Information Parameter (Interworking Only)

0x27CB Non-Presentation Reason (Interworking Only)

0x27D0 Partial Calling Line Identity (Interworking Only)

0x27D8 Source H.323 ID

0x27D9 Source URL

0x27DA Source E-mail

0x27DC Remote H.323 ID

0x27DD Remote URL

0x27DE Remote E-mail

0x27E3 Release Cause Code

0x27E4 H.245 Outbound Tunneling

0x290E NPDI SIP Proxy IP Address

0x290F NPDI SIP Proxy Port

0x2910 NPDI SIP Route Type

0x2914 NPDI SIP Local Lookup

0x2915 NPDI SIP Response Code

0x2916 SIP A Leg Transport Type

0x2917 SIP B Leg Transport Type

0x2919 NPDI SIP To Username

0x291A NPDI SIP To Password

0x291B NPDI SIP To Host Name

0x291C NPDI SIP To Port

0x291E NPDI SIP Refer to Username

0x291F NPDI SIP Refer to Password

0x2920 NPDI SIP Refer to Host Name

0x2921 NPDI SIP Refer to Port

0x2922 SIP REFER-To Header Param

0x2923 NPDI SIP From User Name

0x2924 NPDI SIP From Password

0x2925 NPDI SIP From Host Name

0x2926 NPDI SIP From Port

0x2928 SIP From Display Name

0x2929 - SIP Referred By Header URI TLV

0x292A - SIP Referred By Header Parameters TLV

0x292D NPDI SIP Contact URI User Name

0x292E NPDI SIP Contact Password

0x292F NPDI SIP Contact Hostname

0x2930 NPDI SIP Contact Port

0x2931 NPDI SIP Contact Expires

0x2933 SIP Contact Transport Type

0x2934 SIP Contact URI User Information Qualifier

0x2935 SIP Contact URI Parameters

0x2936 SIP Tunnel Type

0x2937 NPDI SIP Authenticate Scheme

0x2938 NPDI SIP Authentication Realm

0x2939 NPDI SIP Authenticate Username

0x293A NPDI SIP Authenticate Password

0x293B NPDI SIP Authorization Username

0x293C NPDI SIP Authorization Password

0x293D NPDI SIP Proxy Authorization Username

0x293E NPDI SIP Proxy Authorization Password

0x293F NPDI SIP Authentication Timeout

0x2941 SIP Authorization Header

0x2942 SIP Proxy Authorization Header

0x2943 SIP Authenticate Header

0x2944 SIP Proxy-Authenticate Header

0x2946 - SIP Request URI Password

0x2947 - SIP Request URI Header

0x2949 - SIP Response Reason Phrase

0x294A - NPDI SIP Extensions

0x294B Notify Status

0x294C Refer Spans Channel

0x294E SIP Remote IP Address

0x294F SIP Remote IP Port

0x2950 SIP Call ID

0x2951 SIP From Tag

0x2952 SIP to Tag

0x2953 Subsequent Information Status

0x2954 SIP Request URI User Name

0x2955 SIP Request URI Host Name

0x2956 SIP Request URI Port

0x2957 SIP Request URI User Information Qualifier

0x2958 SIP Request URI Parameters

0x2959 SIP Remote Party ID

0x295A SIP RPID Privacy

0x295B SIP Subject Header

0x295C SIP Message Body

0x295D Content Type

0x295E SIP Hostname

0x295F SIP Port Number

0x2960 Privacy Header

0x2961 Private Header Container

0x2962 Private Header Type

0x2963 Private Header Data

0x2964 SIP MIME Information

0x2965 SIP Content Encoding

0x2966 SIP Content Disposition

0x2967 SIP Content Language

0x2968 SIP MIME Message Body

0x2969 SIP Session Expiry Interval

0x2970 SIP Minimum Session Expiry Interval

0x299A SIP Header Field Container

0x299B SIP Header Field ID

0x299C SIP Header Field

0x29D4 SIP Do Not Close Socket

0x29FF Media Local End Point Information

0x2A00 Media Remote End Point Information

0x2A01 Media Per Stream Information

0x2A02 Media Per Codec Information

0x2A03 Media Type

0x2A07 Media Port

0x2A08 Media Payload Type

0x2A09 Media Payload Description

0x2A0A Media Payload Size

0x2A0B Media Clock Rate

0x2A0E Media Connection Address

0x2A13 Media Flow Direction

0x2A17 SDP Media Stream Native Text

0x4E21 Message Configuration Valid

0x4E22 Message Processing Supported

0x4E24 Acceptance Rate

0x9041 Protocol Parameters

0x9042 Application Server

0x9043 Application Server Process

0x9044 Signaling Gateway

0x9045 Signaling Gateway Process

0x9046 Connection

0x9048 Application Server In Service

0x9049 Route Set Query

0x904A Protocol Query

0x904B Application Server Query

0x904C Application Server Process Query

0x904D Signaling Gateway Query

0x904E Signaling Gateway Process Query

0x904F Connection Query

0x9050 General Query Data

0x9051 Application Server State Query

0x9052 Route Set

0x9053 Modify Destination

0x9054 Modify Protocol

0xE002 Service State

0xE003 AIB Container TLV

5 Response Status Values

Response Status Values

6 PPL Component Information

PPL Component IDs

Layer 4/Layer 5 Call Control PPL Information

PPL Component Addressing

Layer 4/Layer 5 Call Control PPL Information

7 Timers and Filters

Timer Conversion Table

PPL Developer’s Guide

1 PPL Introduction

PPL Environment

API Messages used for Protocol Modification

2 Common Atomic Functions

3 T1 Atomic Functions

4 E1 Atomic Functions

5 Layer 4 Atomic Functions

Call Control Channel Management (0x0061)

Layer 4 Call Management (0x0062)

Layer 4 Physical Connection (0x0063)

Call Control Router (0x0064)

6 SS7 Atomic Functions

L3P CIC (0x000F)

L3P Link (0x0010)

ISUP CPC (0x0012)

ISUP BLS, HGBS MGBS

ISUP SPRC (0x0013)

ISUP SSC (0x0085)

L3P TUP (0x0011)

L3P BT IUP (0x0011)

BT IUP CPC (0x0052)

SCCP SCRC (0x0066)

7 ISDN Atomic Functions

L3P Call Control (0x0005) Atomic Functions

L3P B Channel Control (0x0007) Atomic Functions

L3 Call Reference (0x0008) Atomic Function

L3 Global Call Reference (0x0009) Atomic Function

L3 D Channel Control (0x000A) Atomic Functions

L3P PSTN (0x0091) Atomic Functions

L3P BCC (0x0092) Atomic Functions

L3P MGR (0x0093) Atomic Functions

8 VDAC/IP Network Interface Atomic Functions