Configure line properties
The line properties on the Diva Client card are configured using the Diva Client Configuration program.
To open the Diva Client Configuration go to Start -> programs -> Diva Client for Windows -> Diva Client Configuration.
Select the switch type that your ISDN Line uses. In Europe this is typically European ISDN (DSS1).
Click on the Advanced Settings tab to configure your line properties. Most lines are typically Point-to-Multipoint lines and should be configured as shown below:
If, on the other hand, you have a Point-to-Point ISDN Line, configure the line properties as follows:
Click on Apply and then check that the settings are correct by running the Line Check utility.
First published: 10-May-2011
Open access: Product rule: ; Page rule: Auto
