Configuring ISDN protocol for JCT boards in DCM
Background:
When using Dialogic® JCT Media Boards like D/240JCT-1T1, D/300JCT-1E1, D/480JCT-2T1 and D/600JCT-2E1 boards, the name of the ISDN protocol to be selected in the “Interface” tab of the DCM is not same as the one used in Dialogic® DM3 boards. Moreover, for JCT boards, the ISDN protocol name will vary based on the mode to which the Dialogic board has to be configured (User or Network)
Solution:
The below table helps in selecting the proper ISDN protocol to be specified in the "interface" tab when using JCT boards.
| S.No |
Trunk type |
ISDN flavor |
Mode |
ISDN Protocol in JCT |
| 1 |
E1 |
NET5 |
User |
CTR4 |
| 2 |
E1 |
NET5 |
Network |
NE1 |
| 3 |
E1 |
QSIG-E1 |
User |
QTE |
| 4 |
E1 |
QSIG-E1 |
Network |
QNT |
| 5 |
T1 |
QSIG-T1 |
User |
QTU |
| 6 |
T1 |
QSIG-T1 |
Network |
QTN |
| 7 |
T1 |
NI2 |
User |
NI2 |
| 8 |
T1 |
NI2 |
Network |
NT1 |
| 9 |
T1 |
4ESS |
User |
4ESS |
| 10 |
T1 |
4ESS |
Network |
NT1 |
| 11 |
T1 |
5ESS |
User |
5ESS |
| 12 |
T1 |
5ESS |
Network |
NT1 |
| 13 |
T1 |
DMS |
User |
DMS |
| 14 |
T1 |
DMS |
Network |
NT1 |
For example, if the JCT board has an E1 trunk (D/300JCT-1E1 or D/600JCT-2E1) and it has to be configured as user side of NET5 protocol, CTR4 has to be selected as ISDN Protocol in the Dialogic board.
Product List:
Dialogic® D/240JCT-1T1, D/300JCT-1E1, D/480JCT-2T1 and D/600JCT-2E1 Media Boards
First published: 11-Jan-2013
Open access: Product rule: ; Page rule: Auto
