Technical Helpweb

Choose product
Category
Free registration and login is required for access to the Helpweb.


Before you start
DMG4000 - Find the Serial Number and Part Number
Simplified Message Desk Interface (SMDI) Primer
Integrating DMG1000, DMG2000, DMG3000, DMG4000 Media Gateways with PBXs
Getting started with DMG4000 SBA in a Lync environment

Installation
DMG1000 and DMG2000 Media Gateway Firmware Reference
Cooling Requirements for Dialogic?? DMG1000 Media Gateway Series and Dialogic?? DMG2000 Media Gateway Series
What Service Update do I have installed, and how do I upgrade it?
How to find the Serial Number
Checklist for SBA Lync installation
How to upgrade your Diva System Release installation (Windows and Linux).

Configuration
Post-answer In-band Call ID Data Collection
Missing diverting party on NEC DMG1000
How to reset to factory defaults
DMG1000/2000 - Three Common Configuration Issues
Dialogic HMP Software with Dialogic Media Gateways and T.38 Fax
Version 6.0 firmware: where is Call Connect Mode?
'Nailing Down' TDM / IP Endpoints
Dialogic DMG1000 and DMG2000 Media Gateway Integration Notes
Using DMG2000 with a Skype Connect SIP trunk
Connecting a Dialogic DMG1000 Media Gateway to the serial port of a PBX
Suggested configuration when using the Dialogic DMG1000 Media Gateway with European Hicom PBXs in a VM/UM/IVR environment.
On Answer mode returns call connection result too quickly
How to use Dialogic DMG1000 Media Gateway with multiple primary DNs.
SIP Request Retransmit Timers
DMG2000 no ringback tones sent
How to enable T.38 network capture on DMG1000 & 2000
SR140 - DMG Series Configuration "Best Practices"
What port-specific argument to use when configuring DMG2000 via serial port.
Can I disable ECM on the DMG 1000/2000
Cannot access DMG1000/2000 via web interface after enabling HTTPS by accident.
Hardware configuration checklist
Create a basic working configuration for a DMG4000 SBA and Microsoft Lync 2010 using TCP/RTP
Create a basic working configuration for a DMG4000 SBA and Microsoft Lync 2010 using TLS/SRTP
Create a basic working configuration for a DMG4000 as PSTN gateway for Microsoft Lync 2010
Overview of SIPcontrol number manipulation
How to use SIPcontrol Dialplans
How to use SIPcontrol Address Maps

Licensing
How to check if you have a Diva software license installed

Operation
DTMF detection is not functional on Norstar system
TDM Disconnection not relayed as a SIP BYE
Issue with Microsoft OCS 2007 Speech Server
DMG2000 may continuously reboot
Are the DMG1000, DMG2000, and DMG4000 Gateways vulnerable to the Bash Exploit/Shellshock Bug?
Updating DMG 4000 Series

Error Messages
FAILURE Returned by MSP -> 0xFFFFFFE
How to Configure IP Network Ports to Prevent Transmit and Receive Errors for Dialogic?? Media Gateways
Global Call Basic Call Model fails to CONNECT with HMP & DMG2000
What are 833 and 899 alarms on a Dialogic?? DMG1000 Media Gateway?
Outbound fax calls through DMG fail with Q.931 cause #50 - requested facility not subscribed.

Troubleshooting
Incompatibility with IE10; Bottom of browser window is blank after logging into the DMG1000/2000
Front panel and Ethernet port LEDs
Capturing audio to troubleshoot line quality issues
DMG responds to SIP BYE with ICMP message
Windows 2008 R2 SP1 Update and SBA - failure to boot
Backup/Restore of DMG4000
How can I set a date and time in my logs?
DMG 1000/2000 lock up and reboot issue when network scanning is implemented

Diagnostics
Dialogic?? DMG1000/2000 Media Gateways Logging Primer
How to log problems on DMG1000/2000, minimum/initial settings.
How can I tell which DMG1000 or DMG 2000 model I have?

Service Center Logon